Install 154 on 07 rev?

[bzddy]

Hey I'm looking for anyone who has installed a 154 on a rev chassis...I can't seem to figure out how to get the xp drivers to work on the rev chassis as I will need a 2.86 pitch driver to accomadate the xp track. Is there a driver that will fit my rev drive shaft or can I modify the xp drivers to fit...any help is appreciated. Thanx BZ

 

[boots]

i wouldn't modify drivers... buy the right ones

 

[amunro]

yep did this to an 04 i had and just bought new drivers for my stock shaft
worked great

 

[tex78]

now y don't u put a camo extreme 2.5 in? cause the 154 xp stockers just trench... u will be going down hill from your 151 2.25 track

 

[Dmf]

you can buy Avid drivers that will fit on your rev drive shaft which are made for 2.86 pitch XP track. ive put a 163" track and skid in my 04 rev

 

[bzddy]

Thanx to all you guys for your help...also did some digging into the track itself and the 2011 xp tracks are solid no porting. Supposed to give better floatation so I'll be looking for one of those now!! Have a great season everyone!!!! BZ

 

[Showtime]

you can buy Avid drivers that will fit on your rev drive shaft which are made for 2.86 pitch XP track. ive put a 163" track and skid in my 04 rev

DMF, that is 1 sick ride....wowers, i dig it. Saved a pic, do you have anymore? What done to the motor?

 

[Dmf]

DMF, that is 1 sick ride....wowers, i dig it. Saved a pic, do you have anymore? What done to the motor?

Thankyou. The motor is the 04 800 HO. It's ported with a 14:1 head. The timing is advanced. Running single pipe and full stock airbox. Dynod 160 hp. I'll get some more pics

 

[Slamnek]

DMF, that is 1 sick ride....wowers, i dig it. Saved a pic, do you have anymore? What done to the motor?

X2 dude that is a sweeeeet machine. How do you like that track setup as i am looking at putting a 154 on my 05. does it trench like tex78 said?

 

[Showtime]

X2 dude that is a sweeeeet machine. How do you like that track setup as i am looking at putting a 154 on my 05. does it trench like tex78 said?

I also would be interested in running a 154 lot out there for cheap with guys throwing on the 2.5 paddle tracks. Who's tunnel is that?

 

[Dmf]

X2 dude that is a sweeeeet machine. How do you like that track setup as i am looking at putting a 154 on my 05. does it trench like tex78 said?

The track isn't that bad but it is for sure better without the holes. Skidoo has done tests and that's why they are coming out without the ported tracks this year. I myself is going to swap it over if I can sell my track.

 

[Showtime]

What brand of tunnel is that?

 

[Dmf]

What brand of tunnel is that?

Me and my father built the tunnel. He came up with the whole thing

 

[Dmf]

more pics

 

[LBZ]

Me and my father built the tunnel. He came up with the whole thing

I'm going to be doing a 2.5" x 16" x 156" Powder Extreme on my '04 X. I'm just going to do a drop with 7 tooth 3.00" pitch drivers from Avid. They are worth the money from what I am told.

 

[Dmf]

I'm going to be doing a 2.5" x 16" x 156" Powder Extreme on my '04 X. I'm just going to do a drop with 7 tooth 3.00" pitch drivers from Avid. They are worth the money from what I am told.

Nice. I hear the 2.5" paddle makes it nite and day

 

[Slamnek]

two of my buddies put that track on there Rev's and and it was unreal the difference in floatation and climbing ablilities. On is on an 06 and the other is on an 07 XRS.

 

[LBZ]

two of my buddies put that track on there Rev's and and it was unreal the difference in floatation and climbing ablilities. On is on an 06 and the other is on an 07 XRS.

A couple guys I know south of the border swear by it. Matched with a D&R and an 860 kit, they say the rev's are almost unbeatable in the powder!!

 

[Slamnek]

My buddies sleds are both set up with polaris primary team secondary dyno port pipe and can v force reeds big wheel kit and the camo extreme. Its unreal how well those sleds work with that setup. I could only imagine what an 860 would do.

 

[tukernater]

yep, a work of art i have not met Dmf yet but i've met your father and i must say you guys build awsome stuff that works congrats thats awsome good work guys. Bri