in fernie need clutch puller

[soh]

Hi, i am in fernie right now and need to borrow a clutch puller for a 2010 skidoo. if anybody could help me out that would be great.

 

[snopro]

Go to Gear hub. They can help you out.

 

[flabbajabba]

Pull the primary bolt out, put sled on side, fill hole with water, wrap 4 to 5 wraps of teflon tape on primary bolt, put bolt back in hole and pop goes the clutch if you try this I bet you will never use a puller again.

 

[neilsleder]

X2 on the water trick!

 

[Vets07]

x3 on the water trick just go to crappy tire and gets some teflon tape. tip it on its side fill up the hole with water and tighten primary bolt back in and wait for the POPP! dont be allarmed. just clean up any left over teflon strands. then back out the primary bolt so that its just a couple threads in and hold the outer sheave and slame the priamary bolt head on something solid and vola seperatred primary. if you dont have button holders to put it back together i have used haywire before to hold the buttons when putting the primary back together.
if your not comfy with that go see the guys at Gear hub theyre really good.