I need some help with my POS M8

[krash]

Got an issu!09 m8 starts and idles good to 1/4 throttle after that it runs like chit,doesn't pick up rpm.fuel pressure is at 45psi sounds like its cutting out on PTO side cylinder. Any ideas WTF is up? I changed the plugs checked the reeds, ground wire is good (now). Lol

 

[TROLLCAT]

its got spark on all the plugs and no wrench flashing on the dash

 

[suzuki_ryder]

Check your throttle override switch?

 

[krash]

There is a flashing wrench ,I put a new o2 sensorcut the throttle switch as well and still nothing

 

[TROLLCAT]

might have to get it plug in to a cat computor to figger out why the wrench is on

 

[MrHankey]

cut the white wire in the throttle housing,just what i ws told have not done myself

 

[suzuki_ryder]

What is the code that come up? Check your under your hood for the list


Sent from my iPhone using Tapatalk

 

[krash]

17 is the code ! so it's plain white or black and white?

 

[MrHankey]

so i talked to the guy that told me about cutting the wire in th throttle housing ,he cant remember the color but said he will look at his tomorrow

 

[macronut]

17 is the code ! so it's plain white or black and white?

Try here
https://www.snowandmud.com/forum/456/09-m1000-ecu-17-code-flashing-56381-2.html

 

[krash]

Try here
https://www.snowandmud.com/forum/456/09-m1000-ecu-17-code-flashing-56381-2.html

How is that gonna help? I put a new exhaust censor on it all ready.

 

[0neoldfart]

How is that gonna help? I put a new exhaust censor on it all ready.

The ECM sees a fault in that circuit - higher or lower resistance then the set parameters. Check the harness pinouts from the ecm to the exhaust sensor. If ok, you may have a defective sensor. If you are unsure of how it works or don't want to chase wiring, take it to a dealer.

 

[krash]

solved the mystery, wiring harness was shot.