how to tell what size of track your sled has?

hondalrd

Active VIP Member
Joined
Oct 19, 2009
Messages
344
Reaction score
100
Location
Alberta
hello i bought a 2000 summit 700 2 years ago and the guy said it had been stretched to a 151 but it doesn't look like a 151 to me. how would i measure the actual length of it?

Thank you :beer:
 
Last edited:

pistonbroke800

Active VIP Member
Joined
Sep 1, 2009
Messages
933
Reaction score
835
Location
Airdrie
hello i bought a 2000 summit 700 2 years ago and the guy said it had been stretched to a 151 but it doesn't look like a 151 to me. how would i measure the actual length of it?

Thank you :beer:

They have a part number on them. Usually close to where it says camoplast mountain on the outside middle between lugs. It would be something like 9916M for example. Get that and call the parts guy at the dealership and have him tell you what it is.
 

markoo

Active VIP Member
Joined
Nov 9, 2008
Messages
421
Reaction score
361
Location
southern Alberta
First measure the distance from the center of one hole to the next. Probably 2.52(pitch) Then count the number of holes and times it by 2.52 and you will have the length. If it is a 2.52 pitch and a 151 it will have 60 holes.
 

Bogger

Bogger of the GBCA
Joined
Feb 21, 2007
Messages
24,413
Reaction score
18,488
Location
Down by the Bay
OR... measure it...

They have a part number on them. Usually close to where it says camoplast mountain on the outside middle between lugs. It would be something like 9916M for example. Get that and call the parts guy at the dealership and have him tell you what it is.

First measure the distance from the center of one hole to the next. Probably 2.52(pitch) Then count the number of holes and times it by 2.52 and you will have the length. If it is a 2.52 pitch and a 151 it will have 60 holes.
 

rmk mod

Active member
Joined
Nov 3, 2008
Messages
67
Reaction score
34
Location
calgary
I agree with cuting it in half, you well get a much more accurate measurement, than just have the old lady stich it back up for ya!
 

magnet

Active VIP Member
Joined
Apr 29, 2008
Messages
5,364
Reaction score
1,391
Location
GSBA
Cut it in half and mesure it.
ok so now i know my track is a 150 3/4" length. how the heck do i put it back together now?
i was thinking some fencing staples withe the backs bent over to the outside of the track.
has any one ever done this? how did it work? how many staples did you use?
thanks
 

northern bear

RIP May 30,2022
Joined
Jun 17, 2007
Messages
778
Reaction score
587
Location
Barrhead, Alberta
ok so now i know my track is a 150 3/4" length. how the heck do i put it back together now?
i was thinking some fencing staples withe the backs bent over to the outside of the track.
has any one ever done this? how did it work? how many staples did you use?
thanks

Baler splicing kit should work
ImageUploadedByTapatalk1321635491.848980.jpg
 

Snorider

Active VIP Member
Joined
Nov 26, 2008
Messages
3,450
Reaction score
158
Location
Washington
ok so now i know my track is a 150 3/4" length. how the heck do i put it back together now?
i was thinking some fencing staples withe the backs bent over to the outside of the track.
has any one ever done this? how did it work? how many staples did you use?
thanks

duct tape, tie wire and super glue........it'll never break then
 

rmk mod

Active member
Joined
Nov 3, 2008
Messages
67
Reaction score
34
Location
calgary
You can go to UFA and buy some horse matt, it comes in different thickness. Get the 1/4" thick stuff and cut two strips 15" long by about 3" wide. You can then glue the two strips together (one on either side of the track) and to make sure it realy holds, rivit it. Make sure you use washers though, you don't want those rivits pulling through.:cool:
 
Top Bottom