Holzman Variflow

barleyfarmer

Active VIP Member
Joined
Jan 16, 2010
Messages
612
Reaction score
1,112
Location
Vega
I have a 99 Yamaha 700 triple with one and how hard is it to take off and put back to stock?This thing is pissing me off!The kids sled so I don't think it's going to the mountains anytime soon so jetting it isn't a problem!It ran fine last year and this year it's over fueling the outside cylinders,not even at the same time,first ones flooding then for no reason it switches!I had the carbs off and cleaned them and it still does it!What lines do I have to plug or replace on the carbs?Even if I had a picture of some carbs on a triple 700 I could figure it out.Thanks for any help!:beer:
 

Brad62

Active member
Joined
Jan 27, 2008
Messages
70
Reaction score
35
Location
Central Alberta
we used to run the variflows and they always seemed to work. Check that the lines are not full of fuel this sometimes happens and messes with the float bowl levels. other than that i'm pretty sure the bowl vent lines that are plumbed into the variflow,can be just vented to the air box or somewhere like that with no restriction to atmosphere. jetting should be checked after, not sure what the 700 was using.
 

Warhawk

Active VIP Member
Joined
Dec 6, 2009
Messages
441
Reaction score
141
Location
White City
Make sure ALL hoses are clean. Even the one that goes to the airbox.
Has this sled been thru the Kactails around a slew?

Had a Tempa flow that once plugged with Kactails and ran like a fatbitch.
 
Top Bottom