Heres one for Maxwell or all the other DOO folk.

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
107,894
Reaction score
103,598
Location
Milo,Alberta
Restriction in the exhaust creating excessive heat near rewind causing plastic parts to melt? Is this a test or just a question? Lol.
 

1100

Active VIP Member
Joined
Sep 7, 2008
Messages
1,207
Reaction score
1,643
Location
sangudo
Sounds like your pipes are to close to rewind.
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
20,072
Reaction score
43,148
Location
Sherwood Park, Alberta, Canada
Heat tape on new recoil. Or if the recoil is not releasing properly it will run on the Fly wheel catch plate and look like its melted. But with the twin pipes I guarantee that's the problem. Get the whole assembly ceramic coated. Or add heat tape to the outside face of the recoil.
 

Longhairfreak

Active VIP Member
Joined
Oct 19, 2008
Messages
3,261
Reaction score
3,096
Location
Spruce Grove
Heat tape on new recoil. Or if the recoil is not releasing properly it will run on the Fly wheel catch plate and look like its melted. But with the twin pipes I guarantee that's the problem. Get the whole assembly ceramic coated. Or add heat tape to the outside face of the recoil.

That was my next plan.
 

mach123

Active VIP Member
Joined
Jan 22, 2008
Messages
2,005
Reaction score
762
Location
St. Albert
I heat tape all mine with twin stingers or the singles to, like they say lots of heat......
 

Modman

Active VIP Member
Joined
Mar 13, 2008
Messages
6,028
Reaction score
8,445
Location
Castlegar
Make a little heat shield to shroud the recoil. Thin piece of alum should do the trick. Melting one starter you might think it caught against the flywheel plate but what are the chances of it happening twice? I'd say heat.
 
Top Bottom