help

[heavy d]

Hey guys, I know this is the wrong sec. but need quick exposure.

Here's the problem, I'm redoing the top and bottom of a friends kids KX 85 (2002). Got it tore down, on the bench, but can not get the case seperated. Everything is out.....water pump, exhaust valve, k-start, snap rings etc.

I'm known to be a competent wrench, but I can not get this case split......what am I missing ???????? Is there some special tool, that is unique to the kx cases.

I've just completed top/bottom rebuild on a 02 RM 125.....ZERO issues


I'm Stumped.....help.............

 

[benclaluna450r]

First problem it's a Kawi second solution bigger hammer

 

[benclaluna450r]

What about the shifter?

 

[sumx54]

I did my kids kx65 a couple years ago and had no problem with getting that case apart....sorry I'm no help.

 

[TROLLCAT]

Heat the cases up a little bit with a heatgun around the bearings smack it with a dead blow a couple of times

 

[TheLonelyIsland]

this might work......



heat it up with a propane torch.....gotta be really really hot......then pour water on it and cool it down as fast as you can......this works well with stuck/rusted bolts so maybe it'll work.....


give it a shot!:d