Randy J
Active member
Was working then shut off next time I started no gauges?everything else is working lights,hand and thumb warmers,tail lights,seems to run fine even the high beam light works any ideas Tks.
Help with faulty gauge on a 2015 hcr?
- Thread starter Randy J
- Start date
sirkdev
Active VIP Member
connections? unplug and look at connectors did something shake loose. To start anyways
Dawizman
Active VIP Member
In addition to checking connectors for corrosion or moisture, check the fuses.
If everything looks good, do you have another sled you could try swapping gauges with in order to check the gauge?
If everything looks good, do you have another sled you could try swapping gauges with in order to check the gauge?
readimedic
Active member
Check your fuses..
TROLLCAT
Active VIP Member
^^^^^^
what he said
Just bought a 2015 hcr last night with the same issue but did not have reverse or tail light either.
10amp fuse for the dc power was blown and the reverse wire was pinched in the new cfr bars the guy installed himself lol.
For sure check the fuse, if that's ok the check the red/blue wire for power at the gauge wiring with the hood off while the sled is running.
If that's good, check the black ground wire with an ohm meter.
If that's good then it's your gauge.
All that gauge needs to light up is a power and ground.
10amp fuse for the dc power was blown and the reverse wire was pinched in the new cfr bars the guy installed himself lol.
For sure check the fuse, if that's ok the check the red/blue wire for power at the gauge wiring with the hood off while the sled is running.
If that's good, check the black ground wire with an ohm meter.
If that's good then it's your gauge.
All that gauge needs to light up is a power and ground.
Similar threads
