Help! Need to remove front springs off '04

~Rowdy~

Active VIP Member
Joined
Dec 2, 2009
Messages
3,738
Reaction score
5,042
Location
Alberta
Gotta get these babies off in the next 2hrs and I have NO idea how to. Wasn't prepared.

Where do I start to get the front springs off my sled?
 

~Rowdy~

Active VIP Member
Joined
Dec 2, 2009
Messages
3,738
Reaction score
5,042
Location
Alberta
got it...no thanks to you guys...lol :p
 

~Rowdy~

Active VIP Member
Joined
Dec 2, 2009
Messages
3,738
Reaction score
5,042
Location
Alberta
Wasn't that hard was it?

Probably didn't have to get in a panic, did you?

no...no I did not..lol. :eek: I thought it was gonna be really difficult for some reason. But this is as far as I could get them. How do I get them off these?!
 

Attachments

  • IMG00569-20110531-1511.jpg
    IMG00569-20110531-1511.jpg
    55.4 KB · Views: 299

maierch

Active VIP Member
Joined
Oct 26, 2008
Messages
1,565
Reaction score
2,512
Location
Calgary
no...no I did not..lol. :eek: I thought it was gonna be really difficult for some reason. But this is as far as I could get them. How do I get them off these?!

I would recommend taking them to a dealer to get the springs taken off. They can be a little tricky at times...
 

FTBeaver

Active VIP Member
Joined
Mar 19, 2010
Messages
283
Reaction score
346
Location
Wainwright AB
You need to compress the springs then remove the top plate once you have the tension off of them. There is a method using ratchet straps to compress the springs but it is not very safe. I would recommend going to Princess auto and pick up a set of spring compressors.
 

EMANAARON

Active VIP Member
Joined
Nov 2, 2009
Messages
1,354
Reaction score
379
Location
Morinville,ab
You need to compress the springs then remove the top plate once you have the tension off of them. There is a method using ratchet straps to compress the springs but it is not very safe. I would recommend going to Princess auto and pick up a set of spring compressors.

LMAO you guys are crazy, Do it by Hand, Makesure you have it in the softest setting. If you look on the shock shaft, there should be a little black rubber slide that right up to your shock body or it will get in the way of the Spring caps IE.the Silver parts. line the 2 discs up so there is one slot.

Then you can either put your shock again the floor and push down on the spring and have a buddypop your spring caps off there are 2 disks.

If you feel like the Hulk then you can take the top of the shock and grab the spring as close to the spring caps as you can so that you can push the caps off with your thumbs. and put the top part of the shock against your stomach or chest and pull on the spring and use thumbs fingers to pop caps off.:d My method haha!
 

EMANAARON

Active VIP Member
Joined
Nov 2, 2009
Messages
1,354
Reaction score
379
Location
Morinville,ab
It's not that hard to do jeez! I've done it 3 times to my xp! Unless it's a different spring on the 04 which I don't think so.
 

kbrunlees

Active VIP Member
Joined
Sep 24, 2010
Messages
1,704
Reaction score
1,364
Location
Edmonton
Well if all the stories are true Rowdy could just put them between her knees and do it by hand ahh what were talking about again?:eek:(just kidding, I know what we were talking about)
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
109,888
Reaction score
108,723
Location
Milo,Alberta
If you feel like the Hulk then you can take the top of the shock and grab the spring as close to the spring caps as you can so that you can push the caps off with your thumbs. and put the top part of the shock against your stomach or chest and pull on the spring and use thumbs fingers to pop caps off.:d My method haha![/QUOTE]

Holy Cow!! You must have been using that DVD Abs of Steel....:d:beer::beer:
 

~Rowdy~

Active VIP Member
Joined
Dec 2, 2009
Messages
3,738
Reaction score
5,042
Location
Alberta
I will try the ratchet...if all else fails I'm gonna head to a dealer and see if they can do it. I'm not so much the HULK. And as far as putting it between my legs...can ya say OW! lol
 

EMANAARON

Active VIP Member
Joined
Nov 2, 2009
Messages
1,354
Reaction score
379
Location
Morinville,ab
If you feel like the Hulk then you can take the top of the shock and grab the spring as close to the spring caps as you can so that you can push the caps off with your thumbs. and put the top part of the shock against your stomach or chest and pull on the spring and use thumbs fingers to pop caps off.:d My method haha!

Holy Cow!! You must have been using that DVD Abs of Steel....:d:beer::beer:[/QUOTE]

Not even close!
 

EMANAARON

Active VIP Member
Joined
Nov 2, 2009
Messages
1,354
Reaction score
379
Location
Morinville,ab
I will try the ratchet...if all else fails I'm gonna head to a dealer and see if they can do it. I'm not so much the HULK. And as far as putting it between my legs...can ya say OW! lol

What about the Neighbours? arnt Lesbos usually Butch?:d
 

robhayward

Active member
Joined
Nov 27, 2009
Messages
99
Reaction score
78
Location
Calgary / Grande Prairie
LMAO you guys are crazy, Do it by Hand, Makesure you have it in the softest setting. If you look on the shock shaft, there should be a little black rubber slide that right up to your shock body or it will get in the way of the Spring caps IE.the Silver parts. line the 2 discs up so there is one slot.

Then you can either put your shock again the floor and push down on the spring and have a buddypop your spring caps off there are 2 disks.

If you feel like the Hulk then you can take the top of the shock and grab the spring as close to the spring caps as you can so that you can push the caps off with your thumbs. and put the top part of the shock against your stomach or chest and pull on the spring and use thumbs fingers to pop caps off.:d My method haha!

This is the way... Put the shock end on the floor and push the spring cap down with two hands. Tilt it away from the shaft through the opening in the cap.

Buy new springs anyway, that sled has enough miles. Plus you could look at some better shocks too. Those ones suuuuuuuuuck.
 

~Rowdy~

Active VIP Member
Joined
Dec 2, 2009
Messages
3,738
Reaction score
5,042
Location
Alberta
This is the way... Put the shock end on the floor and push the spring cap down with two hands. Tilt it away from the shaft through the opening in the cap.

Buy new springs anyway, that sled has enough miles. Plus you could look at some better shocks too. Those ones suuuuuuuuuck.

If I had the $$ I'd go Exit but I don't unfortunately. :( I may look at replacing those however, as you do bring up a good point.
 
Top Bottom