Hauling gear etc under sled deck

[Summit 934]

A rolling bed is the only way to go but the price they want is ridiculous. I built my own out of various lumber and rollers from Princess Auto for about $50. The framework gets held in with one large bolt through the gooseball hole and the rolling tray gets pinned at the back of that.

 

[gdhillon]

Interesting ideas guys, thanks

the box slider is slick but fairly pricey

think I’m gonna go with a hockey stick and milk crates...gotta save the $$ somewheres lol

 

[snochuk]

Interesting ideas guys, thanks

the box slider is slick but fairly pricey

think I’m gonna go with a hockey stick and milk crates...gotta save the $$ somewheres lol

Make your own box slider, under $150 if you buy the new material and use old hyfax - no more bumps on the head.......

 

[Lightningmike]

I have a full plywood on the truck box floor(Cut around wheel wells) before the deck goes on, then I have a wood box full width between the deck posts that is 6" high and slides on two old hyfax.
Do not have to reach in and whack head on deck reaching in.
Stopper block so the deck can not come all the way out and land on the ground.
Divider at the front of box for the oil.
Everything stays clean under the deck.

Any pics?

 

[Treedragon]

Hockey stick

X2 on the stick

 

[Frankenytro]

X3 for the hockey stick.

 

[2010m8]

Get a Truck Boss SmartBoxx...its the best truck accessory I've ever purchased.

This. Got one with my truck boss. Wouldn’t want a deck without it.

 

[Dragonalain]

This. Got one with my truck boss. Wouldn’t want a deck without it.

I got the truck boss long bed slider. snagged it for $500 second hand. I also will never be with out one now.

 

[Turts]

Love this thing. I think I found it at a Cap It awhile ago.

 

[snochuk]

Any pics?

Square box with plywood bottom and 2x6 high sides

Scew hyfax through plywood on bottom.
Put dividers where you want using more 2x6.
The last box went with the deck to Dawizman I think......
Rarely use deck any more - heated, set up trailer waaaaay better.

 

[brian h]

//uploads.tapatalk-cdn.com/20201009/e10736b506e93866f92b682e6ea41fcf.jpg
Love this thing. I think I found it at a Cap It awhile ago.

seen almost the same thing with holding fixture at princess auto, for $7.00

 

[Grinder]

My setup.