Handlebar Riser?

[BruteCamo]

Currently have a 2" riser on my 01 RMK 700. Anybody know if I can put a bigger one on without cable extensions?

 

[intmid8or!]

No reason you wouldnt be able to go to a 4", perhaps a 6" if you re-route some stuff....

 

[TABSTER]

You will have to change your brake line and throttle extension or longer throttle cable. not 100%, but i do believe you can get away with 4 inches, anymore and you will have to lengthen brake and throttle. Been awhile since i did a polaris.

 

[edge rmk700]

you can do 4 inch riser but you have too get a longer brake line,trottle ok

 

[rmksledder]

Currently have a 2" riser on my 01 RMK 700. Anybody know if I can put a bigger one on without cable extensions?

take your bars off the clamp then lift up on the bars then it will tell you how high you can go without extentions. with my 98 my brake line was just a bit to short so i found a shorter route from the brake and worked out fine for me

 

[Cumminsnorth]

I have a 2" and a 4" riser if you need one

 

[Rocky Mountain Rider]

tt gtt

 

[Rocky Mountain Rider]

Would the result be any different on a 2010 Dragon?