Handle Bar vibration

oler1234

Active VIP Member
Joined
Nov 20, 2008
Messages
3,633
Reaction score
6,167
Location
Calgary, AB & Golden, BC
Anyone else get excessive handlebar vibration?? Is ther any fixes out there?? Clutch is balanced and there are no engine mounts busted. Only thing i can think of is i got my engine stopper up too tight. Mayby try some gel grip gloves.

my hands where stupid numb for almost a hour after a ride. Feels worse than running a weed wiper for an hour.
 

eClKaNdY

Active member
Joined
Nov 1, 2008
Messages
112
Reaction score
98
Location
calgary
i 've got the same issue last week end my hand turn purple after 1 hour of trail ... ends up the crank is bendt... end my clutch got toasted 5000$ of parts...not a good week end...
 

Rob1334

Active VIP Member
Joined
Sep 4, 2008
Messages
11,287
Reaction score
59
Location
Bismarck, ND
Always noticed a lot of vibration in our XP's we have had, always figured it was something the way the steering mount was mounted or something. Never messed with anything just delt with it... p-tek vibrated more than the etec for sure tho.
 

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,780
Reaction score
8,065
Location
Calgary/Nelson
E-tec shakes a lot at idle but smooooth everywhere else. Clutching on the 08 smoothed out that sled. They came with a 413 ramp and a 42degree helix so they where really buzzy. Changed to 414 ramps and a 43/47 helix and smoothed it out a lot. Also just adding primary weight or a softer primary spring can help at around 6000 rpm.
 

treeboy

Active VIP Member
Joined
Nov 14, 2010
Messages
183
Reaction score
112
Location
The Monashee Mountains
I bet it is your crank, my 08 was way out of spec with 7500kms + on it (it shooked like hell). Way smoother now with the new crank in.
 

Hitchguy

Active member
Joined
Nov 6, 2007
Messages
141
Reaction score
13
Location
Leduc
i had that problem with my 08 till I put an isovibe on it and is way better now for long trips.
 

teeroy

Active VIP Member
Joined
Oct 7, 2007
Messages
9,143
Reaction score
14,409
Location
Roma, Alberta
haven't noticed any excessive vibration on my '08, as posted above check your crank runout.
 
Top Bottom