Handle bar heaters not working!!!!

[turborev]

I was wondering what any other ideas people have. The thumb and bar heaters are not working. I changed the relay and still no work. I there any way that in the programming that it got turned off some how?

 

[whoDEANie]

I was wondering what any other ideas people have. The thumb and bar heaters are not working. I changed the relay and still no work. I there any way that in the programming that it got turned off some how?

I'm not sure what kind of switches you have. I have the Symtech ones on my quads and the switches are CRAP. Every couple of times I use them, I have to replace the switches. Now I just carry spare switches with me.

 

[slednk]

Use a multi meter and check the resistance in the grids


Sent from my iPhone using Tapatalk

 

[nielsy]

some years back I was working on a 2008x and the heated grip was not working traced it back to gauge cluster did update on cluster and wupti heated grips working again

 

[turborev]

Thanks i will try that

some years back I was working on a 2008x and the heated grip was not working traced it back to gauge cluster did update on cluster and wupti heated grips working again

 

[treeboy]

when are they not working, at idle or with rpms up? U need the rpms to make them works, some people don't know this.

 

[team-x]

On my 09 they work at idle? Maybe they changed it somewhere or maybe my sleds possessed all I know is that while warming up after sitting in the freezing rain overnight before going back in the inclosed (sled shuffling and mine got left out) my bars were steaming and melted off while the rest was still an icicle

 

[tex78]

It's the e techs that don't seem to work at idle.

sent from my htc

 

[SUMMIT TREE]

It's the e techs that don't seem to work at idle.

sent from my htc

Yes it is the E-TECs that don't work unless the engine is over 2000 rpm, but I guess I would start with the simple stuff like checking the resistance on the grids them selves and work your way back from there.