Handle Bar clamps needed

[RUDY]

i went to put the 2" riser on the sled and notice on the 012 it had a different set up..The handle bar clamps use a round bolt with an allen key head,and the riser block i got has regular bolt heads so they don't sit inside the holes like there suppose to and i cant tighten it up...So what i need is the top handle bar clamp from an older Polaris,so when i do drop the bolts in they are seated proper..If u do have a spare kicking around let me know how much unless someone has a different idea,Thanks

 

[RUDY]

just wanted to add a pic of the kinda handlebar clamps i was talking about.That is what i am looking for,gotta some older wrecked Polaris sleds out there.

 

[wildchild]

What about getting the correct length bolts in socket cap if you have a bolt supply place near by?

 

[RUDY]

What about getting the correct length bolts in socket cap if you have a bolt supply place near by?

thanks alot wildchild,didn't know the name of that bolt.I did do some research after i posted and found the name of the bolt and where i should beable to get them,Thanks again.