f7sp
Active VIP Member
Need a gooseneck hitch installed. Where’s a good place in edm?
Gooseneck hitch
- Thread starter f7sp
- Start date
zal
Active VIP Member
Pioneer Hitches Edmonton
52weekbreak
Active VIP Member
ABC Hitches just east of 50 street and north of Sherwood Park freeway.
4910 - 84 Avenue
Have had all my hitches installed there and seems to be good service, fair prices and no issues with anything they have installed. Used them last Friday to reinstall a fifth wheel hitch I took out to do a bed liner. Always wondered if the original that was in the truck was installed correctly. Turns out they moved the brackets for the rear rail. Took an hour and cost $100. Seems fair.
firstdoo
Active VIP Member
What kind of vehicle are you putting it into? Are you looking at a B&W or a Curt? Both have a 30K ball that flips over and is hidden. I know I had to go with the Curt as I wanted a no drill install.
- Thread starter
- #5
f7sp
Active VIP Member
It’s a 2011 dodge 3500.
52weekbreak
Active VIP Member
What is a "no drill" install? How do you install bolts without a hole through the box or brackets to the frame? I am intrigued.
firstdoo
Active VIP Member
No drill means no drilling through the frame. The entire install only required drilling the hole in the box for the ball and the 4 holes for the safety chain u-bolts. I should have been more specific and said I didn't want any holes drilled in the fame or any welding on the frame done.
Can't remember the year they started, but on my 2013 there is no drilling except for holes in box, hitch is incredibly easy to install. Got a quote from hitch house, remember their comment was the newer trucks were tougher to install, quoted something stupid like $700. When it took under 2 hours. Very happy with my B&W.
any1butjj
Active VIP Member
I got and installed a B&W myself last year - nice gear. Have had a fair amount of work done at Hitch House in the West End and always found them good to deal with
Similar threads
