Good aftermarket replacement track for Polaris 3”

[gedakbx]

What’s a good replace men for a NA 850
Thanks

 

[Teth-Air]

If I was spending the money on a new 3" track I would upgrade the drivers to 3.5" pitch and do the antistab so that I could buy a Lynx 3" x15" track to fit.

Advantages are you get the 3.5" pitch but with the light weight.

 

[06 Dragon]

Probably be some guys swapping over to that track for the matryx boost this winter.
Save them having to cut down the doo track.

 

[Caper11]

Probably be some guys swapping over to that track for the matryx boost this winter.
Save them having to cut down the doo track.

Don’t have to cut a doo track anymore. Order a lynx track.


Sent from my iPhone using Tapatalk

 

[dragonweld28]

What length are you looking for? i have a Camso XL 300 154 3" that can be cut down to 15" wide. Would need 3.5" pitch drivers and an anti-stab.

If you need a 165 I ca order and do the same.

 

[sledhed88]

If anyone has the Lynx parts number for 165x15 share it. I cant find any online fiche for them, and dealers ive called were not able to tell either. Will have a 165 2.75 series 8 track available

 

[+SLEDWRECKS+]

From Snowest / Alaska Member

"2023 Lynx Track
Doo dealer. Part # 504154454. MSRP is around $1400 USD Its listed as a 163” x 15 x 3” . 3.5”pitch . I’m putting it on my 165 boost "

 

[thump]

Retail price I was quoted is $1920 Canadian.

 

[thump]

From Snowest / Alaska Member

"2023 Lynx Track
Doo dealer. Part # 504154454. MSRP is around $1400 USD Its listed as a 163” x 15 x 3” . 3.5”pitch . I’m putting it on my 165 boost "
View attachment 261272

I am assuming the centre to centre of the rails is the same, so a direct bolt in?

 

[dragonweld28]

I have lynx tracks in stock. $1899 plus gst.

I already but these on a few sleds. Fitment is perfect.

 

[Caper11]

From Snowest / Alaska Member

"2023 Lynx Track
Doo dealer. Part # 504154454. MSRP is around $1400 USD Its listed as a 163” x 15 x 3” . 3.5”pitch . I’m putting it on my 165 boost "
View attachment 261272

I’m probably wrong, I thought the Lynx got the new paddle design like the doo.


Sent from my iPhone using Tapatalk

 

[Mountainman52]

What’s a good replace men for a NA 850
Thanks

Ski Doo Track....

 

[jhurkot]

Best replacement for a 3” is a 2.75”.


Sent from my iPhone using Tapatalk

 

[maxwell]

Best replacement for a 3” is a 2.75”.


Sent from my iPhone using Tapatalk

LOL

 

[dragonweld28]

New lynx track is the same paddle design as the old skidoo track. The belting is mountain peaks. Cool design feature.

 

[maxwell]

those arent just mountains that are on there. Those are peaks. Where the guys with skidoo tracks hang out

 

[skid]

those arent just mountains that are on there. Those are peaks. Where the guys with skidoo tracks hang out

 

[tmo1620]

those arent just mountains that are on there. Those are peaks. Where the guys with skidoo tracks hang out

Usually less snow up on the peak so makes sense they like to ride up above the snow belt elevations


Sent from my iPhone using Tapatalk

 

[jhurkot]

LOL

You're laughing because you know it's true.

 

[maxwell]

You're laughing because you know it's true.

i really think it depends where you ride. Up in the north ( blue river, vale mount, McBride ) it is colder and we get a much different snow than further south. I'm not calling you a liar because i am sure you know what works and what doesn't as you ride a lot, But the 2.75 does not work well in these parts.