going to be working at a body shop.

foxrider

Active VIP Member
Joined
Jan 15, 2010
Messages
451
Reaction score
8
Location
Bye
Im a 15 year old and have applied to work at a body shop. The owner has to contact the insurance company to see if im covered. anyways i would like to make a good impression if ro when i start. so any ideas on how i could make a good impression and help fill the job to the best of my abilities?
 

tmix

Active VIP Member
Joined
Oct 18, 2007
Messages
3,909
Reaction score
160
Location
Legal,Alberta
come to work early, be polite, clean appearance, listen and ask good question, take pride in what ever job that you do...cheers and good luck!
 

Bogger

Bogger of the GBCA
Joined
Feb 21, 2007
Messages
24,413
Reaction score
18,488
Location
Down by the Bay
Im a 15 year old and have applied to work at a body shop. The owner has to contact the insurance company to see if im covered. anyways i would like to make a good impression if ro when i start. so any ideas on how i could make a good impression and help fill the job to the best of my abilities?

Just be on time ready to work and pay attention.

On another note... young workers are 5x more likely to be hurt on the job so know your rights, trust your instincs and ask questions.

Heres a couple of links for you to check out.... work hard but always remember no job is worth your life.....



Bloody Lucky (bloodylucky.ca) presented by Work Safe Alberta : Some days are bloodier than others
 

SledMamma

Active VIP Member
Joined
Nov 27, 2009
Messages
2,844
Reaction score
4,441
Location
Alberta
As my husband always tells his new hands on his rig, "Never put your fingers where you wouldn't put your pecker!"
 

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
141,939
Reaction score
56,107
Location
Leduc
Follow all the safety rules,,eyes,feet,chemicals.....

Dust protection....

Good Luck and be careful
 

Orrin

Active VIP Member
Joined
Jan 26, 2009
Messages
1,532
Reaction score
36
Location
Near Chestermere
Never sit idle, if you have nothing to do clean tools, sweep floors etc. Stay active and learn as much as you can, avoid picking up the attitude of the guys who have there for a long time as you won't have the work experience or have paid your "dues" that the other guys have yet. Above all stay safe, every worker in Canada has the right to refuse work if you haven't been trained in a task or you are unsure of your safety when performing the task. Be very carefull around chemicals, dust and vapours that are everywhere in a bodyshop. Things happen fast so stay on your toes, and keep in mind the rewards of having a job while you work..... Girls and toys.
 

SledMamma

Active VIP Member
Joined
Nov 27, 2009
Messages
2,844
Reaction score
4,441
Location
Alberta
Why would anyone take their rooster to a drilling rig????

Seriously? This from the old guy with the reading glasses?? I'm pretty sure you know what I am talking about, and it doesn't have a beak. I'm starting to think you were dropped as a baby... :d
 

ZRrrr

Active VIP Member
Joined
Dec 6, 2006
Messages
3,316
Reaction score
3,459
Location
In my head
Don't go in thinking your "owed" something, or that you "deserve" the big bucks right away. Too many people now a days don't understand hard work and working your way up.

Simple fact you came on here to ask and are excited about the job says a lot about your character already.

Pay attention to the parts of the job you like most and ask for direction in those areas. You will be more satisfied and enjoy the work. Stay away from negative people with bad attitudes. Since your new they will try to suck you in to their negative ways.

Lots of good advice here. You are obviously on the right track with your good attitude and I wish you well.
 

*xo*

Active VIP Member
Joined
Dec 8, 2008
Messages
230
Reaction score
0
Location
Edmonton
Hmmmmmmm...... guess I better lay off the wet-willie's

Hahahahahaha eewwwe...

Always be willing to help and learn.. If you feel something is not safe or out of your abilities it's ok to say no to the job or ask for help....

Goodluck!
 

brian h

Active VIP Member
Joined
Jul 21, 2009
Messages
850
Reaction score
1,499
Location
edmonton alberta
get to work early,keep busy even if its cleaning up the shop,ask questions,take pride in what ever you do.as a service manager the guys that are new to the trade better show they have inetative and ambition.
 

plio7

GBCA Member
Joined
May 5, 2009
Messages
9,789
Reaction score
10,009
Location
Calmer, formerly of the GBCA
c'mon guys lets get to the real ways to get ahead.......kiss a$$ right off the bat.....find out what the boss likes in his coffee and remember it, will win you big points if you pick him up a coffee here and there......talk him up to him when ever the opportunity presents itself......

but in seriousness, if you cant find something to do, sweep, tidy up, organize things, be interested in the company, always be willing to go the extra mile, stay late, come in early....help with things that aren't your job, learn as many different tasks as you can, versatility is job security. and in the longer end of things, be loyal, even if someone else will offer more $, seniority and loyalty show a persons character and in the long run will end up getting you further a head.......JMO
 

foxrider

Active VIP Member
Joined
Jan 15, 2010
Messages
451
Reaction score
8
Location
Bye
thanks for the advice. theres only four people working there and the owner is laying off another student working there because he has to constantly be baby sat. wont have to worry about picking up bad attitudes from senior workers because its only been open for about a month. just hope the insurance company will cover me.
 

polarice

Active VIP Member
Joined
Jan 8, 2008
Messages
14,850
Reaction score
2,206
Location
Calgary, Alberta, Canada
thanks for the advice. theres only four people working there and the owner is laying off another student working there because he has to constantly be baby sat. wont have to worry about picking up bad attitudes from senior workers because its only been open for about a month. just hope the insurance company will cover me.

be sure to let is know how you make out
 

Sofa king

Active VIP Member
Joined
Nov 3, 2008
Messages
272
Reaction score
307
Location
Edmonton
As my husband always tells his new hands on his rig, "Never put your fingers where you wouldn't put your pecker!"

i have used the same line for years :)

if you follow that rule you will never have to pick your fingers up off the floor
 

medler

I love guns
Joined
Aug 6, 2007
Messages
17,662
Reaction score
8,140
Location
Stettler Alberta
Allways ask questions,like what does this do? How do you fix this?In the first little while the broom will be your best friend (Body shops get dirty fast)You will be doing all the grunt work ,,pulling off truck boxes, cleaning ,,sanding new panels taking stuff apart..mechanics don't really like there tools all over the place if you use something PUT IT BACK,There is $15,000 plus in my tool box and i know everyone starts somewhere and we like to get people into the trade ,but there is usually only one of everything....Anyway keep busy and don't be afraid to ask questions,,,.good luck
 

foxrider

Active VIP Member
Joined
Jan 15, 2010
Messages
451
Reaction score
8
Location
Bye
had my first day of work today and it went great. worked for 3 1/2 hours and it went by too fast! my duties were pretty simple, just getting used to the place and learning where everything is. he had me vacuming cars, unwraping parts, cuting up boxes, emptying trash, putting away tools and getting a truck ready for a client. pretty fun day. i made a good impression. when i was waiting for my next orders i was sweeping. and i cleaned up all the tools when he had to take a call after we were done putting some pannels on.:d
 

polarice

Active VIP Member
Joined
Jan 8, 2008
Messages
14,850
Reaction score
2,206
Location
Calgary, Alberta, Canada
had my first day of work today and it went great. worked for 3 1/2 hours and it went by too fast! my duties were pretty simple, just getting used to the place and learning where everything is. he had me vacuming cars, unwraping parts, cuting up boxes, emptying trash, putting away tools and getting a truck ready for a client. pretty fun day. i made a good impression. when i was waiting for my next orders i was sweeping. and i cleaned up all the tools when he had to take a call after we were done putting some pannels on.:d

good start
 
Top Bottom