First ride raptor setup help

lcarberr

Member
Joined
Dec 12, 2012
Messages
6
Reaction score
8
Location
Valemount
Taking my 174" T3 with full raptor setup out for the first time this weekend. 6'1" tall and 230lbs with gear. I just have the shocks set from factory. Any suggestions? Thanks
 

lilduke

Active VIP Member
Joined
Sep 15, 2009
Messages
19,696
Reaction score
70,223
Location
Local
Taking my 174" T3 with full raptor setup out for the first time this weekend. 6'1" tall and 230lbs with gear. I just have the shocks set from factory. Any suggestions? Thanks


Id say try them the way they came from Raptor, then adjust from there.
 

lilduke

Active VIP Member
Joined
Sep 15, 2009
Messages
19,696
Reaction score
70,223
Location
Local
My raptors came with one two clicks and the other seven or something like that.

Haha there you go, thought they were supposed to come on clicker 5. Starting half way through the settings at clicker 10 and adjusting up or
down from there would be a good starting point. Thats what I did.
 
Last edited:

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
20,097
Reaction score
43,303
Location
Sherwood Park, Alberta, Canada
I typically run clicker 5-8 on the fronts depending on the severity of bumps on the trail. And I lower then to 5 in the alpine so it doesn't effect sidehilling. Soft spring setting. Front track shock clicker 5. Rear track shock clicker 10. Raise to decrease ski lift
 

Biggs456

Active member
Joined
Jun 26, 2014
Messages
47
Reaction score
137
Location
Minnesota
Website
www.raptorshocks.com
If you didn't get our tuning instructions with the shocks(some dealers forget to include them when they install or people buy them second hand and don't get the original instructions with them), please check out this page on our website for some general tuning advice:



As always, if you are having troubles, give us a call. Hopefully that helps.
 

Dannyturbo

Active VIP Member
Joined
Jan 5, 2013
Messages
314
Reaction score
594
Location
Valemount
Like maxwell i run mine on 7-10 and on softest spring setting,6'3 280lbs... soooooo much better then the stockers, thanks raptor!


Sent from my iPhone while drinkin a bud light
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
20,097
Reaction score
43,303
Location
Sherwood Park, Alberta, Canada
i came down allan creek in the dark last night with 2ft whoops. bumped to clicker 10 and i could tell everone going 1kmh were wondering what i had done to my sled to make it sail through that stuff
 

BeachSled

Active VIP Member
Joined
Apr 2, 2009
Messages
956
Reaction score
1,238
Location
Sherwood Park
10 on fronts or rears? Or all on 10?

Got my first ride on my tears this weekend. But didn't play with the clickers
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
20,097
Reaction score
43,303
Location
Sherwood Park, Alberta, Canada
10 on the fronts. i left my rear at 5 and 10 and it felt really good and was keeping up with the front. too hard to adjust anyways when the skid is full of snow
 

BeachSled

Active VIP Member
Joined
Apr 2, 2009
Messages
956
Reaction score
1,238
Location
Sherwood Park
Will play with it next trip out. I've got a few extra pounds of front ballast compared to you.
 
Top Bottom