explorer 166 ecoboost

dixopr

Member
Joined
Feb 19, 2018
Messages
12
Reaction score
20
Location
NWT
Anyone running on of these around these parts. Wondering about your realworld fuel use for longer trips.
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,005
Location
Leduc Alberta
Anyone running on of these around these parts. Wondering about your realworld fuel use for longer trips.

See a few go. Looked like they cruised pretty good. Explorer boats work really good but not the toughest boat. You ever sit in a 166. I wanted one till I went and sat in it. Crazy low sides and low windshield. You can’t stand up and drive.
 

ABMax24

Active VIP Member
Joined
Sep 10, 2013
Messages
4,912
Reaction score
14,243
Location
Grande Prairie, Alberta, Canada
See a few go. Looked like they cruised pretty good. Explorer boats work really good but not the toughest boat. You ever sit in a 166. I wanted one till I went and sat in it. Crazy low sides and low windshield. You can’t stand up and drive.

Do you know what they go for? Coyote builds a 19' ecoboost powered boat that are going for around $85k.
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,005
Location
Leduc Alberta
Do you know what they go for? Coyote builds a 19' ecoboost powered boat that are going for around $85k.

Priced out a 166 three years ago pretty loaded up for explorer standards. It had a 4.3DI with AT-309 full uhmw and was $64000. Now I bet it would be 70-75 with an eco boost.
 

ABMax24

Active VIP Member
Joined
Sep 10, 2013
Messages
4,912
Reaction score
14,243
Location
Grande Prairie, Alberta, Canada
Priced out a 166 three years ago pretty loaded up for explorer standards. It had a 4.3DI with AT-309 full uhmw and was $64000. Now I bet it would be 70-75 with an eco boost.

That would be about the cheapest boat on the market.

I think that hull would be perfect for the 250 rotax.
 

ABMax24

Active VIP Member
Joined
Sep 10, 2013
Messages
4,912
Reaction score
14,243
Location
Grande Prairie, Alberta, Canada
Not a fan of that rotax. Pump is weak.

Only issue I've ever had with mine was the intake grate bars bending to allow a 1.5" diameter rock to get stuck in the impeller. In 120hrs I've only ever put one impeller into the pump, and that's because I wanted a steeper pitch to pull the rpm's down. The first one is still on the shelf ready to go.

Parts are cheap for them anyway, I can do a wear ring and impeller for $500, just rebuilding a hammy 212 impeller usually costs double that.

The only thing I don't like about them is the carbon mechanical shaft seal. It's by far the most prone part to fail, particularly when in sandy water.
 

new indyguy

Member
Joined
Oct 12, 2018
Messages
24
Reaction score
66
Location
North Country
Anyone running on of these around these parts. Wondering about your realworld fuel use for longer trips.

Buddy had one for about a month. Took it back because of ecoboost engine issues and the hulls and sides are pretty thin. There was some quality control issues with this boat also. I think the Explorer boat has its place - but on the boney, skinny long trips - its not in the same class as the Big 3 (Firefish, Outlaw and Bratt). The Coyote also has some issues - hull is not tough enough. It is a light boat - but it might cost you in other areas from what I have seen and heard so far - just my opinion.
He is now on a Firefish Piranna with the 2020 Ecoboost motor and a lot happier.
 

mur190

Active VIP Member
Joined
Dec 17, 2008
Messages
988
Reaction score
1,226
Location
bonnyville AB
See a few go. Looked like they cruised pretty good. Explorer boats work really good but not the toughest boat. You ever sit in a 166. I wanted one till I went and sat in it. Crazy low sides and low windshield. You can’t stand up and drive.

yea they have a old school 80's marathon vibe. pretty sure kehoe had a nip in hull design as well.
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,358
Reaction score
12,967
Location
Edmonton
I think the first 12 or 16 came outta his garage, no joke.... can you imagine Roger and Stitch with a dozen boats on the go lol! out of a 2 bay "garage"
 

dixopr

Member
Joined
Feb 19, 2018
Messages
12
Reaction score
20
Location
NWT
We have some deeper silty rivers and pea gravel rivers up here in the NWT and do some long, long trips. A guy here has one of their open 16 foot boats and it does well but a closed bow, more power and speed would be helpful. I have a big 22 sidewinder (westcan) that I run and am very happy with it, but when the water gets low the idea of pushing it to deeper water is..... Yes I've beached it and know what its like.
 
Last edited:

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,005
Location
Leduc Alberta
We have some deeper silty rivers and pea gravel rivers up here in the NWT and do some long, long trips. A guy here has one of their open 16 foot boats and it does well but a closed bow, more power and speed would be helpful. I have a big 22 sidewinder (westcan) that I run and am very happy with it, but when the water gets low the idea of pushing it to deeper water is..... Yes I've beached it and know what its like.

You won’t like the 166 for long trips they only have 85litre tanks. And when I asked if I can get a bigger tank Dave told me just to use Jerry cans.
 

dixopr

Member
Joined
Feb 19, 2018
Messages
12
Reaction score
20
Location
NWT
Yeah, I don't want one. Sorry if I gave that impression. I was interesting in what the ecoboost runs like in a light hull. I'm very happy with my beast of a boat. I'd like to eventually sway the 350 out for something bigger but I'll kill this engine first. Frankly I'm hopeful that indmar make a marine version of the 7.3 Ford.
 

ABMax24

Active VIP Member
Joined
Sep 10, 2013
Messages
4,912
Reaction score
14,243
Location
Grande Prairie, Alberta, Canada
Yeah, I don't want one. Sorry if I gave that impression. I was interesting in what the ecoboost runs like in a light hull. I'm very happy with my beast of a boat. I'd like to eventually sway the 350 out for something bigger but I'll kill this engine first. Frankly I'm hopeful that indmar make a marine version of the 7.3 Ford.

Honestly I think you are going the wrong way. Most everyone these days is headed to lighter engines in jet boats, less weight means less power and less fuel required to push it. Being the reason the aluminum block GM engines have caught on so well, a comparable Ford raptor motor makes equivalent and according to some more hp than the GM engines in marinized trim. But the weight of the cast iron block seems to sway builders and customers away. The cast iron block 7.3 would be the same.
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,064
Reaction score
15,266
Location
Grande Prairie
LS3 6.2 DI would be my choice hands down .
I wouldn’t consider the Indmar from my findings . Eco or any other from them .
Do your research .
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,358
Reaction score
12,967
Location
Edmonton
Yessir! Go big, anything less is just a waste!
 

Attachments

  • 1.PNG
    1.PNG
    970.7 KB · Views: 159
Top Bottom