EXIT X1 FRONT SHOCKS
- Thread starter NoBrakes!
- Start date
Caper11
Active VIP Member
Hit up Cody Borchers, he’s a distributor for those. Or PM me your contact info and I will pass it on to him.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Thread starter
- #3
- Thread starter
- #4
ippielb
Active VIP Member
- Joined
- Mar 4, 2011
- Messages
- 1,967
- Reaction score
- 3,605
- Location
- SE Saskatchewan
- Website
- www.youtube.com
I had x1's on my M series and they were huge improvement over the stock shocks. Only issue was getting parts to rebuild. Save yourself the effort and just send them down to the states to get Zbros to rebuild them. I took mine to a local shop and it took 7 months to get them back.
Dawizman
Active VIP Member
I noticed a huge difference on my 22 Summit X Turbo. I ran x2 aggressive front and rear, and x1 center. I could run a whooped out trail a whole lot quicker, and they soaked up jumps pretty nice as well. I only ran one trip on the stocks, but it was enough to make me want better.
This year I moved the front 3 over to my 24 expert and got the new x2 aggressive on the rear.
mikermz250
Active member
Not sure where you took yours but if anyones in edmonton area, MBsuspension had all 4 of my exits rebuilt in about a 2 week turnaround
Caper11
Active VIP Member
Is that how they are supposed to be installed? The resi looks too far forward.
Sent from my iPhone using Tapatalk
- Thread starter
- #9
NoBrakes!
Active VIP Member
I did try both shocks on and the other has the clicker in the panel… so I’m thinking this is how it’s gotta be?
MB suspension reclocked a set of exits off a articat I bought to put on my t3. Good guy to deal with. They’re better on the trail forsure. But I think what people don’t understand is how good they are for side hilling through ruts. Stock ones don’t suck up the trenches when your side hilling and bounce through an old rut. Those exits will and you will still be in control after.
Dawizman
Active VIP Member
Caper11
Active VIP Member
Just curious.
I know if a regular KYB resi shock is installed that way it will hit the arm on full compression. I was just curious if changing them to the other side would put the resi inline with the shock.
Sent from my iPhone using Tapatalk
I know if a regular KYB resi shock is installed that way it will hit the arm on full compression. I was just curious if changing them to the other side would put the resi inline with the shock.
Sent from my iPhone using Tapatalk
Dawizman
Active VIP Member
They will hit the body work going on the other side.
My shocks came off my gen4 which has had its fair share of full compression.
bentwrench
Active member
If put the other way the resi hits the plastic pretty hard, mine look like that and 2 of us compressed the front and it looks like there's no way it can touch the a-arms......i hope
I think the exits must have a shorter resi.
I’ve seen a brand new free ride in the mountains that must of had shocks put on wrong at pdi smash the an arm as well like caper mentioned
Expensive mistake for that guys dealer
I’ve seen a brand new free ride in the mountains that must of had shocks put on wrong at pdi smash the an arm as well like caper mentioned
Expensive mistake for that guys dealer
Dawizman
Active VIP Member
I believe the resi mounts a lot lower on the shock body with the kyb
Similar threads
