Exhaust can question

[zeke800]

I noticed on the 19 model summit the exhaust probe is on the bottom. Just wondering how you can mount the probe on the top of an mbrp race can. The cord isn’t long enough. Any help would be a great thx.

 

[ferniesnow]

Dallas, I have TheThing cooker can and the temp probe is also on the top. I snipped the zip tie on the wire harness that goes to the temp probe and found it was long enough. Then I zip tied the temp probe harness so that it wouldn't fall down. Looks almost factory done!!

 

[zeke800]

Thx for the help

 

[pete gads]

Hi i have a 2019 g4 and just put a ggb can on it. Same thing that the exshaust sensor is at top. Cut zip tie and where the connector is disconnect from holder clip and will have lot of lenght. The extra lenght zip tie to water pump line so wont touch pipe.