Exhaust Can for 800 E-TEC XM

Luke The Drifter

Active VIP Member
Joined
Dec 29, 2008
Messages
1,512
Reaction score
2,756
Location
Parkland County
My MBRP trail can has a decent tone/bark when WOT but is very reasonable at trail/low RPM, I'd recommend it. The main reason I put a can on my T3 is to access the chaincase without having to pull the can off everytime. Tone is far better than ear bleeding loud... Kinda like having a straightpiped 350 that sounds like garbage and having the same engine run a proper exhaust system that sounds great and doesn't annoy everyone.
 

BEL

Active VIP Member
Joined
Mar 3, 2015
Messages
753
Reaction score
861
Location
Alberta
Just ordered SLP Y, exhaust and can for our 2015 163's, which should be here this week. Did lots of research and almost everyone I talked to said this was the way to go. So I guess we'll see.
 

summitrenter

Member
Joined
Nov 9, 2009
Messages
15
Reaction score
5
Location
Stony Plain, AB
I just bought the thing cooker, I understand they get super hot and a risk of melting the oil reservior.... can anybody confirm. is there a recommended fix? Pipe wrap? or heat tape on the plastic components near the 'thing'


Thank you,
 

extrmsled

Active VIP Member
Joined
Feb 1, 2007
Messages
154
Reaction score
417
Location
Wainwright , Ab
Put a mbrp trail can on my 14 xm
rode 1 day and had a low rpm hesitation
put stock can back on and run perfect
just my experience
 
Top Bottom