Dodge wheel hub bearing?

[OVERKILL 19]

Anyone know what they sound like when they are failing? I have a whurr when I come to a stop. Almost sounds like a really low tire pressure or bad u joint. I changed the axel Ujoints not long ago so I'm sure it's not them.

 

[tex78]

What kind and year ??


Did ya put in greaseable joints ??


Does it squeek backing up ?

Does it vibrate under accel ??

sent from my I phone azz kicking HTC

 

[OVERKILL 19]

Sorry
2008 3500
It not the brakes, it does it just coasting. Ujoints are non greasable. Might be 3 months old.
Never tried it backing up. I will!
There is isn't a vibration as just the noise. And does it accelerating or de accelerating , getting louder over time.

 

[DRD]

Just changed one on my wifes Yukon a week ago, it was only making a noise at 40MPH or when coming to a stop.

Jack it up and take the brakes off and spin the hub, you will be able to tell pretty quick usually.

 

[Summitric]

Does it make more noise when driving and sway the truck down the road slightly right to left to right to left etc..... Does it make more noise when slight turning or worse one side than the other, or does it even make more noise when doing this?

 

[OVERKILL 19]

Does it make more noise when driving and sway the truck down the road slightly right to left to right to left etc..... Does it make more noise when slight turning or worse one side than the other, or does it even make more noise when doing this?

It seams like its come from drivers frt. no different when turning. Ill try the side to side thing.

 

[Summitric]

it seams like its come from drivers frt. No different when turning. Ill try the side to side thing.

yup, try the side to side test..... Post your observations

 

[OVERKILL 19]

Thx
I will as soon as I can

 

[OVERKILL 19]

No difference in sound when left to right sway...
In reverse makes same noise.

 

[OVERKILL 19]

Starts around 16-20 Kms/h and just keeps getting louder

 

[Summitric]

Normally a wheel bearing will make more noise one direction vs the other, but we have had worn/faulty bearings straight ahead too.... Possible front diff noise?

 

[tex78]

What about the front drive shaft 2 joint ??

Is it loose or tight ??

sent from my I phone azz kicking HTC

 

[OVERKILL 19]

What about the front drive shaft 2 joint ??

Is it loose or tight ??

sent from my I phone azz kicking HTC

Just pulled it off as we speak. Going for drive now to see.

 

[OVERKILL 19]

Noise still there with no frt drive shaft. But way quieter ??

 

[OVERKILL 19]

There is slit play in frt shaft but joints seam good. Ill take it up to pats driveline and have them cheak it out and pop nes joints in while its out

 

[OVERKILL 19]

I guess if its the frt diff time to swap in some lower gears for the 36"s...fricken dodge is killing me! Good thing I love the mega cab!

 

[OVERKILL 19]

What are hub bearings worth?

 

[tex78]

Like 400 to 600 a side.

sent from my I phone azz kicking HTC

 

[lloydguy]

I duno if your truck has the same type set up as my 02 2500 cummins,but I paid about $220 per side
when I did mine.I had no warning sounds before mine went.Just a bang then major grinding.

 

[tex78]

It's different and more $$$$ than the 02.

sent from my I phone azz kicking HTC