Dodge Ram Diesel RPM gauge low

arcticdodge

Active VIP Member
Joined
Nov 15, 2006
Messages
616
Reaction score
232
Location
Redcliff Alberta
I have an 2006 Dodge Ram Diesel. It is the 5.9l. When i start the truck it idles and runs like it should but my tach sits at about 200rpm. When I rev it up the guage jumps up and seems to be fine but when I let off the throttle the tach drops back down to about 200rpm. Anybody experience this? What could be the problem? Thanks Mark
 

Summitric

SUPER COOL MOD & Supporting Vendor
Moderator
Joined
Oct 21, 2006
Messages
48,075
Reaction score
32,180
Location
Edmonton/Sherwood Park
Website
www.bumpertobumper.ca
faulty guage? or pcm? scan the system and take a live scanner reading of what the system thinks its idling at? possibly voltage problem? send me a pm of this tomorrow morning and i'll check for service bulletins and check identifix for common problems?
 

HRT Offroad

Active VIP Member
Joined
Jan 2, 2008
Messages
812
Reaction score
1,099
Location
Kimberley, BC
I have an 2006 Dodge Ram Diesel. It is the 5.9l. When i start the truck it idles and runs like it should but my tach sits at about 200rpm. When I rev it up the guage jumps up and seems to be fine but when I let off the throttle the tach drops back down to about 200rpm. Anybody experience this? What could be the problem? Thanks Mark

This was a very common issue with '06 model trucks. I know of at least a couple dozen people that have ha tach display problems in '06's. My own truck started by reading low....then it would bounce around....and finally it wrapped itself around and pretty much stopped working all together.
 

arcticdodge

Active VIP Member
Joined
Nov 15, 2006
Messages
616
Reaction score
232
Location
Redcliff Alberta
Have been told to replace the instrument cluster. Doesn't sound like to much fun. But will have to get at it one day
 

aaron_m

Active member
Joined
Jan 2, 2009
Messages
104
Reaction score
69
Location
NW sask
give a light, or a heavy tap on the cluster guage covering. seems to move my rpm gauge back where it is supposed to be.
I have an 06 3500 as well, same deal. live with it, or belly up the $700 (i was told) for a new complete instument cluster.

I have an 2006 Dodge Ram Diesel. It is the 5.9l. When i start the truck it idles and runs like it should but my tach sits at about 200rpm. When I rev it up the guage jumps up and seems to be fine but when I let off the throttle the tach drops back down to about 200rpm. Anybody experience this? What could be the problem? Thanks Mark
 

Bunn

Active VIP Member
Joined
Nov 22, 2007
Messages
319
Reaction score
258
Location
Calgary
Cluster it is.....Common problem on 06-07 models.Cluster is a snap to change though.15min in and out.
 
Top Bottom