DIGATRON how do you change batteries?

[dieselboy]

hey, anyone one know how to change batteries in a 3 window? least i think its the batteries one sleds numbers are dim then go out and other sled numbers are good and dark but the thing keeps turning off???? on the other forum some one said look at the ground first, which wire does it ground through and which wire gives power? both only have a tach wire two egt and a Water temp.

CANT RIDE THE SLEDS WITHOUT THEM!!!

 

[posnick]

Replacing the batteries is simple. With the front of the instrument facing you, remove the left end cap. Slide the battery pack out from inside the unit and replace the batteries. Slide the battery pack back into the instrument, making sure that the batteries are facing the back of the unit. Replace the end cap and you are done.

found this at Digatron owners manuals

 

[dieselboy]

thats not how mine is though? i take the sides off and all i see is micro chips, i try to split it apart and its glue together?

any other suggestions?

 

[posnick]

i have an avenger 2 and mine dosnt have replaceable batteries. if yours is sealed tight and you open it up it will leave it prone to getting moisture inside. i dont think the batteries are your problem. all batteries are for is so you can review the recordings when the sled is shut off.

 

[dieselboy]

do you know which wire grounds and which is for power?

 

[posnick]

after a little research it looks like your batteries could actually be in the end caps. However i dont know what model you have. go here for trouble shooting http://www.exhaustgas.com/docserver/Docs/129.pdf
and here for your manual
Doc List

 

[dieselboy]

thanks for the help buddy