Caper11
Active VIP Member
Sent from my iPhone using Tapatalk
Diamond S Mesh hood for XM
- Thread starter Caper11
- Start date
Sent from my iPhone using Tapatalk
maxwell
Active VIP Member
What a monstrosity. But I bet it shaves 20lbs!
mach123
Active VIP Member
save wieght and heat for sure..............
maxwell
Active VIP Member
What about air intake system? No headlight? No thanks. Be good for a turbo sled but messing with the intake system on an etec may be asking for trouble
snopro
Active VIP Member
I bet you could drop 20 lbs out of the stock hood system. Hood looks good from what I can see in the pic.
LBZ
Active VIP Member
I still don't understand why a different airbox would make it run like poo. Do they use an maf sensor in the etec? If so it may just have to be scaled properly for the new air flow.
If not as long as the piping was the same size to the throttle plates the size of the box it comes from shouldn't matter. The piping is going to be the tightest restriction in the system apart from plugging off the intake screens.
maxwell
Active VIP Member
Not saying it will run like poo. Just talking with a few folks the design of the air intake system is critical
LBZ
Active VIP Member
I'm gonna have to pull my hood and look at it to see what all is there.
I just don't see what is so damned special about an ETec that makes it impossible to make a smaller lighter airbox.
I just don't see what is so damned special about an ETec that makes it impossible to make a smaller lighter airbox.
oler1234
Active VIP Member
Nothing... It's just a air box. It is shaped the way it is for sound. There is a sensor on the intake tube but it is only for a air intake temp. You can pulln that sensor out of the tube and put it anywhere and will still run fine. It's is nice to see from diamond s, the xm hood weigh way too much.
if they could pull close to 20lbs off then you wold be nearing the 08/09 weights when paired with a can. Be nice if the could put a windshield on
Last edited:
powpowpowpow
Active VIP Member
hood looks really good,lots of heat will escape which will help the clutchs
After waiting years for a storage area the one given appers to be gone with this hood along with headlight and the already tiny windshield. Will do wonders to get rid of heat though and looks good from the one pic. Just depends on what you want.
snopro
Active VIP Member
I haven't really seen heat being a problem on the XM like it was on the Revs and XP's.
Bnorth
Active VIP Member
There are bunch of pics on SW of this. Looks good with the gauges integrated just need to add a headlight. I want one but don't even have my XM yet lol.
deaner
Active VIP Member
I would think you could accomplish the same thing for a fraction of the cost by just making a lexan or (material side panels are made out of) shell. I have a BR Tech hood on my XP and it wieghs next to nothing. Although I would NOT recommend BR tech to anyone so hopefully someone else makes them. I drilled lots of tiny holes in mine so it has tonnes of venting, doesnt let snow in, and it sheds snow great.
Cool product but I think its detailed construction is kind of overkill.
Cool product but I think its detailed construction is kind of overkill.
Woodsie1984
Active VIP Member
How well do these hoods seal for not letting snow in ?
The Kickass One
Active VIP Member
Really good... and they are tough.. been riding trees with 2 for 3 seasons and now into season 4. Saves 12 bs, cools great. Need a light for night riding and storage. Gauge stays in place nicely.
kovs
Active VIP Member
I had mine apart on bench. I'd like to get my hands on a airbox cheap one with damage or something then I'd take dremel to it and see what I could do. Think it would be easy to almost gut except a skeleton to fasten in. Then make a new intake from the horn in Center over to maf/ box
Sent from my iPhone using Tapatalk
kidinloghouse
Active member
they work awesome, and take a beating. very durable. and the machine is twice as easy to roll over when stuck without all the stuff up top
Woodsie1984
Active VIP Member
Got one for 500$ new from a guy, didn't end up putting it on his sled then sold his sled. Putting it on 1200 turbo, so hoping will keep snow out and let heat out.
