Dealer cost to rebuild 2013 summit 800 engine

[altaredneck]

Not sure what’s going on with the kids machine. Has 3600 km on it and it won’t start. Died on the hill. Anyway played around with it and am figuring it’s gonna need a top end maybe bottom aswell as it’s hard to pull over without plugs in and really hard to pull over with plugs in. I’m thinking something maybe bent. Anyways just trying to get a ball park figure on what this may cost thru a dealership to do. Is it even worth doing. I hate to see this thing sitting around not running. Thanks

 

[snopro]

Not sure what’s going on with the kids machine. Has 3600 km on it and it won’t start. Died on the hill. Anyway played around with it and am figuring it’s gonna need a top end maybe bottom aswell as it’s hard to pull over without plugs in and really hard to pull over with plugs in. I’m thinking something maybe bent. Anyways just trying to get a ball park figure on what this may cost thru a dealership to do. Is it even worth doing. I hate to see this thing sitting around not running. Thanks

Prolly going to have to do some dissasembly before you can get an accurate number? I'd drop it off at BowRidge next Monday and see what they say> Could be just a bad bearing on the crank or could be a catastrophic failure.

 

[maxwell]

Dealer installed short block will
Be around 5500$ on the XM. You can buy the engine yourself for around 2500 snd do yourself.

But I wouldn’t get too carried away, figure out what’s wrong with it first snd then let us know!

 

[altaredneck]

That’s my plan to drop off and get estimate hoping for the best but was just getting ready to try and stomach the cost lol aswell as the turnaround time

 

[o zone guy]

Not sure what’s going on with the kids machine. Has 3600 km on it and it won’t start. Died on the hill. Anyway played around with it and am figuring it’s gonna need a top end maybe bottom aswell as it’s hard to pull over without plugs in and really hard to pull over with plugs in. I’m thinking something maybe bent. Anyways just trying to get a ball park figure on what this may cost thru a dealership to do. Is it even worth doing. I hate to see this thing sitting around not running. Thanks

sounds like she's locked up ... No worries... IF iF iTs ouTa warranty and the dealers estimate is to high and ya live in the CaLgaRY area CaLL NeiLs he's a journey men mechanic for north of 25 years he worked many years for Bow cYcLe plus u can hang out in HiS SHoP and he will take ya through the stePs : caLL Lori 403-247-7029 he did great job on my ski doo ShorT Block better estimate then the DeaLeR.. Just a thought ... The KarMa KoWboY is on youR SiDE... !!! Yee HaW !! LoL

 

[gedakbx]

Not sure what’s going on with the kids machine. Has 3600 km on it and it won’t start. Died on the hill. Anyway played around with it and am figuring it’s gonna need a top end maybe bottom aswell as it’s hard to pull over without plugs in and really hard to pull over with plugs in. I’m thinking something maybe bent. Anyways just trying to get a ball park figure on what this may cost thru a dealership to do. Is it even worth doing. I hate to see this thing sitting around not running. Thanks

check out CV tech.com they may have exchange engines. Personally you may be better off parting it out.

 

[Mcstuck87]

I have a used engine I can sell ya, I’m up in slave lake. But if I recall... doesn’t motts machining in Edmonton sells engines for 2g ? ( might be wrong on that was a year or two back)

 

[skegpro]

Like maxwell said, engine swap time. Easy peasy.

 

[catmando]

If you decide to buy a used engine send me a pm . May be able too help

 

[SUMMIT TREE]

Not quite apples to watermelon comparison but buddy just had his 800 from a 2015 poolaris pro rebuilt at Motts for 2500. That was with an exchange cylinder and crank. His had a piled up crank bearing, major detonation damage and a bunged up cylinder from said detonation. It was completely piled. So I suspect you should be cheaper assuming yours would have less damage. He had removed engine and taken it to them. It also came with an entire gasket set for the rebuild for all the other gaskets to re install the engine. Fyi.

 

[skegpro]

Motts is an excellent choice for engine work.

 

[Mcstuck87]

Just saw this on kijiji


https://www.kijiji.ca/v-snowmobile-...p_ios&utm_medium=social&utm_source=ios_social

 

[Rhodesie]

does motts get components from cv tech?

 

[Tchetek]

does motts get components from cv tech?

They defiantly have cv tech cylinders for exchange.

 

[HotShotHarry]

Motts is a CV Tech dealer. Excellent service there.

 

[deaner]

Depends whether you can switch the engine yourself. If youre planning on paying the dealer to do it you're much better off selling the sled as is and taking your loss. No sense putting $5500 into a $5500 sled

 

[everest8]

I put a 800r into my Summit from the factory. 1year unlimited mile warranty. 1 yr and 1 month at 1100-eleven hunderd miles on flatland Ontario and %$#@ crank broke. I would personally not trust doo replacement engine.

 

[bobsledder]

I put a 800r into my Summit from the factory. 1year unlimited mile warranty. 1 yr and 1 month at 1100-eleven hunderd miles on flatland Ontario and %$#@ crank broke. I would personally not trust doo replacement engine.

Allways hearing about doo engines going and seeing adds for one year old sled with new engine so if they can't make the original last why buy a rebuild from them. I got a guy in golden to build one for me and was about 1500 bucks. There are guys like Linderman in Hillcrest that can build you a solid engine.

Be curious to hear from the OP what he found with it

 

[catmando]

If interested I may have a 800 etec engine for sale , still in breakin mode.

 

[rgashkei]

Just did my 2012 800etec at dealer in Sk. Was $5200 with new reeds. Turned out somehow a piece of plastic had one of the reeds stuck open leaning out a piston. Should have done top end only but wanted a new engine.