Cracked Pro Steering Support

06 Dragon

Active VIP Member
Joined
Nov 17, 2006
Messages
2,185
Reaction score
3,984
Location
Red Deer County
Was checking out the play on my 2012 pro steering and noticed that the upper support is cracked on both sides where the upper steering shaft support bushing is mounted. Does anyone make an aftermarket replacement. Google shows a couple of pictures, but can not seem to find any other info on them. Also known as overstructure.
 
Last edited:

polaris011

Active VIP Member
Joined
Nov 18, 2010
Messages
666
Reaction score
692
Location
olds ab
I believe u need to replace the whole piece. Part of it is cast and part is the tubing that runs down to the foot holds and back by the fuel tank... I busted mine a while back

Sent from my SM-G920W8 using Tapatalk
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
Lots of risk welding cast. I have done it and it held up but if. It done correctly it won't take much to break again. I'd get a new one or find aftermarket like mentioned
 

CUSO

Active VIP Member
Joined
Jan 21, 2007
Messages
4,772
Reaction score
5,538
Location
Edmonton
IMG_0885.jpg Buddy's pro had the same thing. After looking closer, he found lots and lots of additional things broken. He had to totally rip it apart.

Look a little closer, there may be more.
 
Last edited:

Frankenytro

Active VIP Member
Joined
Oct 10, 2013
Messages
821
Reaction score
1,561
Location
Edmonton ab
View attachment 195686Buddy's pro had the same thing. After looking closer, he found lots and lots of additional things broken. He had to totally rip it apart.

Look a little closer, there may be more.


broken bulkhead half? This would be prime time to throw a front cooler in that thing! Also, the bulkhead halfs aren't glued together from factory but it definatley helps make the the bulkhead itself much more rigid. The lord adhesive is certainly not cheap, but at this point it seems like a $100 tube is a walk in the park compared to what he is up against.
 

CUSO

Active VIP Member
Joined
Jan 21, 2007
Messages
4,772
Reaction score
5,538
Location
Edmonton
It's all back together, lots of parts, glue, $$$ etc. He decided to pull the motor for convenience.

Just wanted to mention that the original damage was first thought as the upper structure, but motor mounts etc were affected,.
 

CUSO

Active VIP Member
Joined
Jan 21, 2007
Messages
4,772
Reaction score
5,538
Location
Edmonton
He clipped a rock with his ski no real evidence of damage, except left ski was back a tad. He first thought it was just the upper structure, then he looked inside.

Its all together now.

12646937_10156501755760301_2263405695204955676_n.jpg 12711139_10156561369545301_3995728367729806121_o.jpg 12728801_10156561370670301_3040226263776659452_n.jpg 12747936_10156561373200301_8578664905237237330_o.jpg 12795530_10156607746640301_1337518290000176053_n.jpg
 
Top Bottom