dezmitchell
Active VIP Member
Well i just picked up a 02 cr 125. Its a project bike and the guy b4 me installed a new crank and put the case halves back together but im in the process of putting the shifter back on and it wont shift thru all the gears i can shift thru 3 and i cant find neutral.
-My question is this the shifter barrel gear has a mark on it where does it line up (i assume it has to line up with something).
-What do i line up with where
-Is it possible that the previous owner installed the forks or trans gears wrong? Everything spins freely with no binding or grinding.
-My question is this the shifter barrel gear has a mark on it where does it line up (i assume it has to line up with something).
-What do i line up with where
-Is it possible that the previous owner installed the forks or trans gears wrong? Everything spins freely with no binding or grinding.
