Correct Jerry can and mount 05 summit

[OVERKILL]

I'm looking for a Jerry can for my 2005 summit 800 Highmark HO. There are lots of different styles of ones out there, which is the correct one for the year and model of my sled? Plus what would I need to have it secured onto my tunnel? And can it ride on there if my heat exchangers run underneath my tunnel where the Jerry can would be sitting...Pics would be awesome!

 

[Trashy]

This is the best pic I have, from my old 04 HME. I used the factory Doo one, can't remember if I rivited it or bolted it???

 

[mxz800x]

Bolt it. The rivets work loose.

 

[OVERKILL]

This is the best pic I have, from my old 04 HME. I used the factory Doo one, can't remember if I rivited it or bolted it???


https://scontent.xx.fbcdn.net/v/t1....=94eef1b51e7e32676475c817a2f4149c&oe=59278F58

Is there some sort of brackets then that rivet on or that you can bolt on that hold the Jerry can in place?

 

[Summitric]

The strap holds it in place... Bolt the 2 little hold down brackets to the tunnel(rivets will come loose and break off)

 

[tex78]

The revs came with rails mounted the tunnel

I installed them on my xp so I could carry 2 doo Jerry cans

Has 4 hook holes a side if I recall

I could go take a pic if needed

sent while drinking tea's

 

[OVERKILL]

The revs came with rails mounted the tunnel

I installed them on my xp so I could carry 2 doo Jerry cans

Has 4 hook holes a side if I recall

I could go take a pic if needed

sent while drinking tea's

There are no rails on my tunnel at all so I'll have to figure out some other way for securing loads. A picture of your rails would be great!

 

[vodoo103]

I believe that I have the whole setup from my 2007 if you need it. Jerry can, strap and the brackets that were pop-riveted on the tunnel.
Just need to double check to make sure it's all there in the box of Rev Chassis stuff I still have. I had quit using the proper strap long ago in lieu of self-retracting ratchet straps & a tunnel rack in 2012. Now the Jerry can doesn't get used any more either since I started using the Linq jerry can when I bought my 2015.

 

[OVERKILL]

I believe that I have the whole setup from my 2007 if you need it. Jerry can, strap and the brackets that were pop-riveted on the tunnel.
Just need to double check to make sure it's all there in the box of Rev Chassis stuff I still have. I had quit using the proper strap long ago in lieu of self-retracting ratchet straps & a tunnel rack in 2012. Now the Jerry can doesn't get used any more either since I started using the Linq jerry can when I bought my 2015.

What would you want for it?

 

[Summitric]

WE ALSO PUT THE RAILS DOWN BOTH SIDES OF THE TUNNEL.... THESE ARE FOR A 162" TRACK ...STOCK BRP PART #

#37RH Wire Protector 518324553

#38 LH Wire Protector 518324554

 

[vodoo103]

I believe that I have the whole setup from my 2007 if you need it. Jerry can, strap and the brackets that were pop-riveted on the tunnel.
Just need to double check to make sure it's all there in the box of Rev Chassis stuff I still have. I had quit using the proper strap long ago in lieu of self-retracting ratchet straps & a tunnel rack in 2012. Now the Jerry can doesn't get used any more either since I started using the Linq jerry can when I bought my 2015.

Send me a PM if you need it - might miss responses to this thread.

 

[vodoo103]

WE ALSO PUT THE RAILS DOWN BOTH SIDES OF THE TUNNEL.... STOCK BRP PART # 37
RH Wire Protector

518324553






38
LH Wire Protector

518324554

I also have a pair of these wire protectors sitting on the shelf from my 2012 154" if you need them.

 

[OVERKILL]

Send me a PM if you need it - might miss responses to this thread.

PM sent.

 

[tex78]

Ya that's them, that I installed on my xp

sent while drinking tea's

 

[vodoo103]

Sent from my iPhone using Tapatalk

 

[Summitric]

My 05 and 06 never had those little round bumper stops.. Wtf??


Sent from my iPad using Tapatalk

 

[vodoo103]

The round bumpers replace the screws in the lower plastic seat cover. The brackets are probably already there under the plastic. I had taken everything off when a bear ate my seat (another long story) and I put a Boss seat on.


Sent from my iPhone using Tapatalk

 

[OVERKILL]

WE ALSO PUT THE RAILS DOWN BOTH SIDES OF THE TUNNEL.... THESE ARE FOR A 162" TRACK ...STOCK BRP PART #

#37RH Wire Protector 518324553

#38 LH Wire Protector 518324554

My skidoo has the wire for the tail light running down the top side of the tunnel. I'd guess that means I would have to have those rails to hide the wire in to prevent jerry can sitting on top of it and squishing and wrecking it? Does the jerry can just sit between the rails then, with the rails mounted along outside I presume?

 

[tex78]

Yes, wires go down the exhaust side if I recall

Rails mount pretty close to the outer edge of the tunnel too

sent while drinking tea's

 

[tex78]

Yes, wires go down the exhaust side if I recall

Rails mount pretty close to the outer edge of the tunnel too

sent while drinking tea's

Put some tape or something down on tunnel also cause the can rubs tunnel alot

sent while drinking tea's