Considering a 3" track conversion

[bdt92]

Hey guys I'm thinking about putting a 3" track under my 2014 sp, I've heard that they will rub? What will I need to do this conversion?

 

[Jsymes]

Re: Considering a 3" track conversion

About 3 grand, T3 drivers and a T3 track. Won't rub. Atleast mine don't on my 154

Sent from my SM-G930W8 using Tapatalk

 

[Bnorth]

3" pitch track and t3 drivers. When I did mine it was cheaper to get the t3 driveshaft and drivers than get the avids and have them pressed. Play with clutching and gearing after you're done.

Sent from my SM-G925W8 using Tapatalk

 

[handyandy]

Not worth the cost in my opinion. In the end you can buy a year or two old t3 for reasonable price and save all the work.

 

[kovs]

If your going to do that I'd also do the t3 skid relocate kit from sled head racing.


Sent from my iPhone using Tapatalk

 

[Jsymes]

I didn't change my gearing, clutching or skid location and it runs great

Sent from my SM-G930W8 using Tapatalk

 

[catrutt]

The t3 also has the drop and roll that makes the 3in work way better than the sp with the same track.

 

[mur190]

Did my 14 freeride a couple years ago, great mod, prob some of the best money I spent!
cost for me was right around 2200. The SHR skid relocate helps a bunch. With the used xm market gone to **** and our sleds worth next to nothing this is a heathy upgrade that will keep the skis in the air and all our G4 buds within reach.

 

[gofast89]

Did my 14 freeride a couple years ago, great mod, prob some of the best money I spent!
cost for me was right around 2200. The SHR skid relocate helps a bunch. With the used xm market gone to **** and our sleds worth next to nothing this is a heathy upgrade that will keep the skis in the air and all our G4 buds within reach.

Did you change your gearing?


Sent from my iPhone using Tapatalk