cleaning plastic

zenk

Active VIP Member
Joined
Nov 18, 2010
Messages
331
Reaction score
236
Location
red deer
does anyone have an suggestions on whats best to clean the plastic on the sled with???
 

zenk

Active VIP Member
Joined
Nov 18, 2010
Messages
331
Reaction score
236
Location
red deer
pledge or firniture cleaner

well my plastic is red... and parts od it are really dirty on belt side from belt and exhaust side i think from break dust will pledge take that off or is that more for a shine?
 

AkNomad

Active VIP Member
Joined
Feb 2, 2010
Messages
1,550
Reaction score
1,795
Location
Alaska
looks liek this stuff has a degreaser... might have to check this stuff out... can you buy it in stores?
Not that I am aware of, just order it from the website, that's what I did.
 

redrum

Active VIP Member
Joined
Apr 28, 2008
Messages
221
Reaction score
4
Location
Martensville.Sk
I always go at it with WD-40 to clean and it`s safe on the color. Then shine it up with Pledge afterwards. Seems to work awesome on both my quad and sleds..
 

Rkwhite

Active member
Joined
Nov 4, 2008
Messages
83
Reaction score
188
Location
kamloops
I use "goof off" I found it at home depot, did everything including grease and dust around clutches. Didn't damage any decals or yellow panels on the XRS.
I have used pledge, it shines it well but dosen't degrease.
 

DIEZEL

Member
Joined
Oct 14, 2007
Messages
9
Reaction score
8
Location
Fort Sask, AB
The skidoo stuff works really good but pricey and WD-40 works good. I don't like goo gone as it is harsh and will fade your plastic if u use too much of it. As well, WD-40 leaves a residue thus a magnet for belt dust and fluff to attract to. If u wash it off when your done its not an issue. Thats my 2cents worth if it matters
 

quad4life

Member
Joined
Dec 11, 2010
Messages
11
Reaction score
0
Location
edmonton
we supply green cleaning products if your in town let me know i,ll give you a sample works great
 

xtreamclean

New member
Joined
Jan 21, 2011
Messages
1
Reaction score
0
Location
NC
Website
www.mxwash.com

CAN-DOO

Grampa Member
Joined
Sep 30, 2006
Messages
21
Reaction score
0
Location
Edmonton, AB.
Spray Nine works most awesome as a degreaser withouth the fume and residue of wd-40. For under the hood, chassis, all good no worries but on the plastic, I sure agree, you definately have to be careful. No dwell time, spray on then wipe off, careful in the elbow grease you put into the wipe, but I use it for the entire machine and it works awesome. It leaves behind a clean surface that takes the pledge or what every polish you are using pretty well.
 

BC Sno-Ghost

Active VIP Member
Joined
Feb 15, 2009
Messages
1,238
Reaction score
444
Location
Kelowna
Trim Shine. Doesn't degrease but sure leaves a shine. Works real good on black plastic:beer:
 
Top Bottom