cheap-ish cummins mods?

[john s]

I would say the cheapest way to get more bhp is stacks and to get uncontrollable power is a monster sticker.

 

[Joholio]

I wish I could afford to take a year off work. Must be nice livin the dream...

 

[joey]

I wish I could afford to take a year off work. Must be nice livin the dream...View attachment 158712

college. so i'm taking a year off work. but attending school. problem?

 

[talkinghamster]

as you can tell, this is not the appropriate forum to be asking these questions.

if your serious, head over to a dodge cummins specific forum and they should be able to give you some pointers.

 

[TylerG]

going to agree with John S...... get some monster stickers......

 

[joey]

going to agree with John S...... get some monster stickers......

oh Ive already beaten that....Ive got a big red one on the back with woody wood pecker smokin a cigar and it says "Mr. Horsepower"....thats gotta add a good 75 right?

 

[gates559]

You are living in the land of modded diesels, lots of shops to ask, every third truck is modded in GP!

 

[joey]

You are living in the land of modded diesels, lots of shops to ask, every third truck is modded in GP!

i'm in victoria right now, then going to abbotsford in september, wont be in GP again until april

 

[Trashy]

I have the stock (6.0 Ford) which is supposed to be a POS??? Yes it only has 128K on it, and there is some rear end noise.

The best MOD for your truck is, Cold air kit, Let it breathe out of the tail pipe, and leave it the phuck alone!

 

[Joholio]

A nice pair of white sunglasses goes a long way too

 

[joey]

I have the stock (6.0 Ford) which is supposed to be a POS??? Yes it only has 128K on it, and there is some rear end noise.

The best MOD for your truck is, Cold air kit, Let it breathe out of the tail pipe, and leave it the phuck alone!

as previously stated, I already did those "mods". 4 inch straight pipe and a cold air intake, also took out the silence ring from the turbo and grinding and polished the fuel plate and moved it forward. its a cummins, ya cant leave it alone lolol

 

[Luke The Drifter]

as previously stated, I already did those "mods". 4 inch straight pipe and a cold air intake, also took out the silence ring from the turbo and grinding and polished the fuel plate and moved it forward. its a cummins, ya cant leave it alone lolol

FYI pulling the silencer ring does sweet FA for horsepower gains. Just makes the turbo more vocal.

 

[joey]

FYI pulling the silencer ring does sweet FA for horsepower gains. Just makes the turbo more vocal.

I'm aware I love the turbo whistle, it did cut down the turbo lag a bit to be honest

 

[CrankShop910]

Crank up the timing, free

 

[Mike270412]

Moth balls in the fuel tank

 

[arff]

Moth balls in the fuel tank

Will that help my power too???


Or just keep mice out???

 

[Popsiclestand]

Don't forget your XL truck nuts hanging off the hitch that never gets used. Gotta complete the compensation right?