Changing the diamond drive fluid

[zonker892]

I need to change the diamond drive fluid in my 2010 m8. . . . .Is this a tough job? I dont have much experience tinkering with sleds, should I just take it in?

 

[Dobir]

I need to change the diamond drive fluid in my 2010 m8. . . . .Is this a tough job? I dont have much experience tinkering with sleds, should I just take it in?

Easy job and your owners manual walks you through it...good for you to tinker a bit to have some idea of what is what....

pull the belt off, secondary off, take out the drain bolt, let the oil drain, tip it on its side, pour in the flush, lay it back down re-install the secondary and belt, lift the track off the ground and give it enough throttle to turn the track, follow same steps to drain the flush, flip it back on its side and pour in your new fluid..likely 12oz (will say in your manual), put the secondary back on...

 

[Steve D]

Just have rags around to clean up.