Cargo Mate Blazer combo sports. Info wanted.

flying frenchman

Active VIP Member
Joined
Feb 1, 2009
Messages
946
Reaction score
962
Location
alberta canada
28ft long,extra 6" high, 5200 lbs axles,16" on centre beams.
Here's a little info on it. I would like to get feed back on these.
How they tow?
Durability of tin.
Stuff falling apart
I want to hear the good and bad about this trailer.
 

JP.

Active VIP Member
Joined
Jan 22, 2013
Messages
514
Reaction score
738
Location
Lacombe
28ft long,extra 6" high, 5200 lbs axles,16" on centre beams.
Here's a little info on it. I would like to get feed back on these.
How they tow?
Durability of tin.
Stuff falling apart
I want to hear the good and bad about this trailer.

I have 2 cargo mate blazer car haulers for work, they seem to be ok built trailers, one is 20' other is 16' 5200# axle filled with tools. They pull ok but I would never use one for long trips sledding. Get a car hauler v-nose or a gooseneck and aluminum is nice!
The steel trailers really depreciate after 2 years of driving salty Canada winter hwys.
 

flying frenchman

Active VIP Member
Joined
Feb 1, 2009
Messages
946
Reaction score
962
Location
alberta canada
Yes, this is a v nose car hauler. One thing I don't like is the rivet exterior, but was told by a buddy that when you have exterior damage it is easier to repair. I don't know if this true. H&H make a nice CL gooseneck, but then the two last sleds would have to go in backwards, sound like wok to me.
 

Chump

Active VIP Member
Joined
Dec 31, 2008
Messages
2,145
Reaction score
8,554
Location
calgary
I've got a 14'x7' cargo mate enclosed. Used for work for the most part along with occasional sled trips. Found it was kinda cheaply made. Had a problem with the brakes withing the first month they had run the break wires above the axle which all got pinched and fried my brake controller. Also rusted kinda quick, a lot of these manufactures put aluminum shells on a steel frame which causes it to rust quick. I'm also very picky about keeping my **** clean so it wash negligence. If I were to buy another I would spend the money to get a full alluminum.
 

tripster

Active VIP Member
Joined
Mar 16, 2010
Messages
254
Reaction score
754
Location
Princeton bc
I have a 8.5x18 continental cargo that is also made by forest river like the cargo mate. The only bad thing I have to say about it is the crappy wiring. They use scotchlock connectors for all connections and I ended up redoing all outside connections after 6 months due to corrosion.
 

Chump

Active VIP Member
Joined
Dec 31, 2008
Messages
2,145
Reaction score
8,554
Location
calgary
One other problem I had with cargo mate was it came with 4ply tires... Couldn't believe this was on a trailer rated for 7500 pounds. Had them wore out in I bet 3 months tops. If I had noticed this when I purchased I new I would of told them to keep those tires and give me somthing rated for more then a versa. The dealer did supply me with a new brake controller, but after seeing there hack wiring I decided to re wire it myself instead of giving it back to dealer and being down from work for a day or two. All in all wouldn't buy a cargo mate again.
 

flying frenchman

Active VIP Member
Joined
Feb 1, 2009
Messages
946
Reaction score
962
Location
alberta canada
Thanks for the reply on this trailer. Talking to others also I've decided not to go with this company. I will look at Wellscargo and other brands. I like for stuff to last a long time with no problems.
 

tripster

Active VIP Member
Joined
Mar 16, 2010
Messages
254
Reaction score
754
Location
Princeton bc
I have used enclosed trailers for several years for my mobile service and the wells was one of the worst I owned. I usually did 150km of logging road per day and the wells tubing was so light the screws holding the paneling kept stripping out. I had a charmac wasn't much better it even lost the side door. I did have good luck with interstate other than cracking in the corners around the rear doors. With all the us made trailers they do cheap out on the wiring I usually install a sealed junction box on as soon as I get the trailer.
 
Top Bottom