Car seat in passenger seat of Rzr 800S

[Hefe04]

Had a look around and did not see any discussions on installing a car seat for a young kid in the passenger seat of a rzr. I am looking at purchasing a rzr with the intentions of putting a car seat in the passenger seat. I have seen people put them in the rear seats before, but I have no need for the rear seat. Wondering if they fit in the stock seats or do seats need to be changed. Any feed back would be great. Thx

 

[Culvert]

The RZR seats are all the same front or back. Have friends that run car seats in the RZR4 no problem. So you should be fine aswell.

 

[sumx54]

My wife uses a car seat in her rzr for our little one. I might have a picture or two kicking around somewhere. We strap it in with the seatbelt and also run a small ratchet strap around the back of the rzr seat and child's seat. Works fine.

 

[papajake]

and no roll bar in the back to protect the little ones, go figure

 

[sumx54]

and no roll bar in the back to protect the little ones, go figure

What do you mean?

 

[Director]

I strap my daughters car seat into the passenger seat of the rzr all the team.. Loop the strap thru the channel on the back of the seat, drop a knee on the seat and suck it down as tight as i can so it's secure... Rzr seat belts have a wedge that you can slide up against the latch and it holds the waist belt as tight as you set it so the car seat never comes loose - like it's bolted in place.. When i take the seat out to push it's plug and play back in.. Works awesome, she loves it and mom get's a break..

 

[Hefe04]

What do you mean?

Ya not sure what he means, I'm talking about the passenger seat and it is in the full role cage and I will prob put the doors on, so I would think this would be a pretty darn safe way to go. Thanks all, glad to hear it works good. The set up will be for my wife and daughter also.

 

[SM-rider]

I think what , is trying to say is that sxs vehicles are not designed to accommodate children when driving even with car seat installed due to safety issues.