Polaris_Fanatic
Active member
what kind of can should i get???? i have a 94 indy 500 and it is way too quie, any suggestions?
Can
- Thread starter Polaris_Fanatic
- Start date
moyiesledhead
Active VIP Member
What's wrong with quiet?
800polaris
Active member
sno stuff and mbrp make the loudest cans , that i know of. It depends on what u want. U need to look at what u want in terms of hp. mbrp drops on average 10 lbs with the removal of the can and 4- 5 hp with the new can. every 10 pounds u lose, u gain 1 hp. if u drop the stock can and put on a mbrp youll gain approx. 6 hp, which is a considerable difference in a sled. I run a mbrp on my 800 and its loud and you can really feel the pull.
- Thread starter
- #4
Polaris_Fanatic
Active member
i dont want a super loud one i just want something that sounds good and is louder than my stock muffler
indydude
Active member
I might be wrong on this one, but all the indy 500's that i had,(91 and 98) have had a one piece pipe/muffler so you can't put a can on unless you go to a aftermarket pipe.
team dirt
Active VIP Member
- Joined
- Oct 17, 2008
- Messages
- 2,155
- Reaction score
- 5,929
- Location
- brooks ab/seymour arm
- Website
- www.sledseymourarm.ca
build your own, its actually pretty easy.
- Thread starter
- #7
Polaris_Fanatic
Active member
it is a one piece pipe, you just have to get a new y pipe for it
indydude
Active member
the y pipe has nothing to do with the pipe or can, and yes i forgot to mention that you could chop off the factory can/muffler and build your own. I made my own can for my rev last winter, i made it to the same dimentions of a buddies can on his summit. Sounds great to my ears and many others on the trails thought so to.
but what about the back pressure and everything that goes with that?
indydude
Active member
sorry, i forgot that if you get aftermarket twins for the 500 they don't use the y pipe, they use flanges. As for my can, like i said I made it to the same dimentions as my buds can, inside and out.
Similar threads
