Burning coolant

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
is there any way to tell if you have a leak without smelling it. I pulled my pipe off and i have what appears to be little specs of coolant in my pipe?
 

AkNomad

Active VIP Member
Joined
Feb 2, 2010
Messages
1,550
Reaction score
1,795
Location
Alaska
is there any way to tell if you have a leak without smelling it. I pulled my pipe off and i have what appears to be little specs of coolant in my pipe?
I couldn't smell coolant on mine but my coolant bottle was empty and it eventually started smoking real bad. I'd take check the coolant bottle and if it's low, i'd take the hood off, pull one of the plugs and see if you can smell coolant.
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
well i just preemptively took my motor apart to be safe. everything inside looks like new but the oil on the reed valves looked to be milky so new pistons and new gasket kit and away we go i guess .
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
20,097
Reaction score
43,301
Location
Sherwood Park, Alberta, Canada
well i just preemptively took my motor apart to be safe. everything inside looks like new but the oil on the reed valves looked to be milky so new pistons and new gasket kit and away we go i guess .

before doing that i would pressure up the system. i use a shraeder valve on the small return line on the coolant bottle. pressure up to 20 PSI.

listen for leaks in the block . oil shouldn't be milky on the raves.
 
Top Bottom