BRP Safety Recall

snoflake

Active VIP Member
Joined
Oct 15, 2008
Messages
1,553
Reaction score
5,558
Location
Red Deer
Its a real thing. Had it happen to fellas Lynx last spring. bolt loosens off, then the o-ring/seal fails and it dumps a pile of fuel in a hurry. Sled had a sleep over for a few evenings while he waited on the seal.
 

jcjc1

Active VIP Member
Joined
May 6, 2020
Messages
631
Reaction score
1,053
Location
Portghanistan
I looked on the parts diagram under the Fuel and EFI subsections and couldn’t see which screw/bolt but I’m no mechanic.
Would like to check it myself if it’s accessible.
 

jcjc1

Active VIP Member
Joined
May 6, 2020
Messages
631
Reaction score
1,053
Location
Portghanistan
Right side if you’re looking at the sled from the front which would be the Pto side?
 

snoflake

Active VIP Member
Joined
Oct 15, 2008
Messages
1,553
Reaction score
5,558
Location
Red Deer
No, right side standing on the boards. However, I believe there is one of the these screws/injector seals on both jugs. just so happened this was on the mag side.
 

Ramjet15x

Active VIP Member
Joined
Oct 9, 2008
Messages
249
Reaction score
276
Location
Leduc
Mine blew off last year, daughter borrowed sled, hosed down the turbo and didn’t catch fire
 

kimrick

RIP Fellow Sledder
Joined
Nov 28, 2009
Messages
2,236
Reaction score
6,304
Location
In Heaven & Revelstoke
Transport Canada issued recall for same thing I believe,,,

 
Top Bottom