new24stroke
Active VIP Member
Well the old Turbo m1000 goes in for the Boost-it Box. Pretty excitied to see how it works. Sick of always playing with the dam pureoligic box. Should make it alot funner to ride.
Boost-It
- Thread starter new24stroke
- Start date
- Admin
- #2
You will ride with a smile all the time and your friends will ride with you again after you install this.
mclean
Active VIP Member
I was looking into this as well...what turbo kit you running?
I want to try it on my twisted m8. Post your results when u try it
I want to try it on my twisted m8. Post your results when u try it
Kyle91rs
Active VIP Member
Hey nick. Pm "smokindave" on here. He has 2-3 twisted m1000's all with the boost it fuel controller. He lives and dies by them. He can tell u all u need to know.
- Thread starter
- #6
new24stroke
Active VIP Member
I am running a OVS race gas kit. You need to have 4 injectors to make this work.
clifford the big red dog
Active VIP Member
better invest in some industrial velcro and a tether incase the velcro dont hold
Yes he does, i drove a 600km rounder today to go see him as he is building me a 08 M1000 twisted turbo from the ground up right now. Wouldnt make much sense that he would build something that doesnt work over and over since he has two m1000 twisted turbos right now, a 4 stroke yammy turbo, and he is building himself another m1000 turbo lol guy loves them so much he needs on in each color, awesome guy to talk to with a lot of very valid points.
mclean
Active VIP Member
I was debating getting this for this season but I didn't see any on the cats, just yammi's so I held off but seeing how you guys say that daves sleds work really well I may end up trying it this season...if I don't try it on my twisted m8 maybe my room mate will on his twisted m1000...he has had nothing but issues with it. Maybe got a couple good hours on it last season out of 4 trips with it.
Kyle91rs
Active VIP Member
Look up TSS turbos for a proclimb 800. The Micku boys have their sleds dialled in using the boost it box and they were tearing it up all last year. Boost it can be used on any mostly any boosted sled. After seeing skylers 1000 last year, I think a boost it box would solve a lot of his troubles. Call up neil, he has a shop on ponoka. I'm after referring my brother and a few other guys to him. He's very knowledgable and willing to help. I bet one phone call to him and you will be on board haha.
- Thread starter
- #11
new24stroke
Active VIP Member
His boost-it box for this year has a barametric sensor in it .ITs supposed to make it a set it and forget.
HagmanMod1
Active VIP Member
I heard Neil's box uses the same sensor as the dobeck boxes
NM
Boost It - Fuel your Boost
LOL...even if we did use the same map sensor as dobeck, that would have nothing to do with the software that we use to control our fueling.
We have added a new sensor for the cats and etechs this yr so fuel start time is absolutely consistent regardless of elevation. It will eliminate the lean or rich bog when boost comes on.
Nice try though.
- Thread starter
- #14
new24stroke
Active VIP Member
Didn't know the Dobeck box uses the same sensor. I hope not cause mine sure didn't work right
NM
Boost It - Fuel your Boost
Don't worry about it. I honestly do not know if our xic uses the same map sensor as dobeck does, but all a map sensor does is read pressure. It's all in our software that controls fueling. All of our software is written by our engineer, who has been turboing fuel injected engines for 30 years...so I think he knows a thing or two about fuel injection.
HagmanMod1
Active VIP Member
never said anything about your software just asked about the sensor. A little touchy are we
NM
Boost It - Fuel your Boost
Nope not touchy at all, just kind of looked like you were leading.
Questions end with question marks.
Obviously I'm not the only one that took it that way if you look at the response.
Sooooo??????? Lol
NM
Boost It - Fuel your Boost
Similar threads
