don4802
Member
I installed a nitrous system on my 2009 polaris 600 Shift IQ. The solenoid will not trip. I've tested it with a variable power supply and can get it to trip under pressure at 15.5VDC. I measured the power supplied by the control box to the solenoid and it's only 11.27VDC when you push the button. I verified the supply power to the controller and it's 15.8VDC supplied by the sled. Called boondocker but haven't heard back yet. Thought I would send this out and see if there where any ideas out there? Also I thought the solenoid was bad so I ordered a new one and I have the exact same issue. I'm thinking it's a power issues but not sure where to go from here.