Boondocker help!!!!!

[dezmitchell]

Well i picked up a used boondocker box for my 06 M7 wiried everything up used the jumper connector to input my numbers went to start the sled NOTHING!!!! Sled will NOT start, so i check my ground everything is good. Ended up moving my ground a few different places just to be sure and nothing its like the box wasnt even getting power. I unplug my BD box and throw everything back to stock and sure enough sled starts no problem.

Any ideas im kind of lost and thinkin i got screwed out of $250 im hoping its just something stupid on the box settings menu or something. If anyone has been thru this please help me out ....

Thank-you.

 

[powder junkie]

almost sounds like wrong box?

 

[dezmitchell]

Well thats what i thought but when i used the battery jumper it said A-cat 6-7-8 on the start up screen.

 

[snowseeker]

Call Glen at Spindrift. Mine did the same thing and he fixed it in 2 minutes.

 

[Xtremist]

man i hate to say this, but the boondocker control box is a pile of chit...... i had one and it gave nothing but at issues, and dan from xtreme machines in sylvan lake gives it a bad rap and believe me that guy knows his stuff....my advice, get a pure logic box.

 

[dezmitchell]

Well i figured it out my injector wires were backwards....Even tho the sled the box came off of was a 06 ...I guess that year cat changed up there wiring halfway thru production.

A BIG THANK-YOU TO GLENN AT SPINDRIFT in mcbride very knowledgeable man and saved a lot of my time and spared a ton of frustration.