Black Paint pen and black fuel can

yammyman

Active member
Joined
Jul 13, 2010
Messages
144
Reaction score
78
Location
Sorrento, BC
Anyone figure out the best method to black out the fuel cans yet, with success?

And, anyone know where to get the closest match paint pen to the black powder coating?

Thanks!
 

LBZ

Active VIP Member
Joined
Apr 16, 2010
Messages
3,068
Reaction score
3,651
Location
Central Alberta
Fernie used a rubberized rock guard that was good for plastic. I think that seems to be holding up well for him.
 

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
112,522
Reaction score
86,572
Location
beautiful, downtown Salmon Arm, BC
You mean like this one?

IMG_1651.jpg

Stuff is available at Crappy Tire in a spray can. Get the one for plastic and I used the whole can.
 

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
112,522
Reaction score
86,572
Location
beautiful, downtown Salmon Arm, BC
What was the product name? Holding up well so far?
I forget the name Lenny, but it was a "red spray can" and it had plastic as one of the materials that it could be used for. The "black spray can" didn't list plastic as a suitable base material.
Yeah, how's it holding up?

I did that in early November. Put over 1000 km on the sled and it still looks the same except for the removal of the masking tape on the spout……………….how's that for holding up?


Hahahahaha………..I haven't used it yet but it sure looks pretty!
 

JoHNI_T

Active VIP Member
Joined
Apr 18, 2007
Messages
5,717
Reaction score
2,289
Location
Chestermere
I used a plastic spray paint from crappy tire and it all flaked off after time

I think when the fuel is -20 here in calgary then I pull up to the mountains 3 hours later and its -1... the sweating of the fuel and flexing in the plastic makes it come off.

If you try maybe a spray liner like on truck beds it may stay on but would need to cure. I have heard the dye is the best way to go and no issues with peeling

once it starts flaking or chipping its a pain and gets everywhere fyi
 
Top Bottom