Bike rack for sled deck?

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,595
Reaction score
18,803
Location
Edson,Alberta
Was wondering if anyone made a bike attachment for the superclamps hooks mounted on my deck. I looked at the website and found nothing. I'm finding securing 2 full suspension bicycles on my deck, a pain in the butt. Figured it would be neat to have something that was a quick install and secured the bikes while towing my travel trailer. Yes I could get a carrier for my trailer, but would rather use my deck, because it will have either a quad, or the bikes on it while towing my trailer anyway.
 

Cameo

Active member
Joined
Aug 7, 2008
Messages
85
Reaction score
17
Location
Antler Lake, AB
I just tie the bike down using quick straps to my home built deck, just like you would a dirt bike. one strap from the back of the deck to the seat or rear end of the bike (insert technical term here) to keep the back tire from hopping around.
 

shawnmcgr

Active VIP Member
Joined
Dec 7, 2006
Messages
924
Reaction score
143
Location
Calgary
I use a fork mount setup. The fork quick clamps are available from a rack dealer (I think Thule makes them). I just bolted them to a 2x4 and bolted the 2x4 to the deck. Maybe you don'e want to take the front wheel off? You should be able to bolt down one of the tray type roof racks?
 

GRD

Moderator
Moderator
Joined
Nov 14, 2006
Messages
3,008
Reaction score
317
Location
Calgary
Anyone have updates on this? Would like to put two full suspension mountain bikes on the deck with some sort of tire mount/tray. I have a limitless deck, trying to determine how to incorporate the d-rings used for the superclamps.
 

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
112,062
Reaction score
86,088
Location
beautiful, downtown Salmon Arm, BC
These may be a little bit overkill but they throw in with the deck. They are made by Condor Canada https://www.amazon.ca/condor-motorcycle-wheel-chock/s?k=condor+motorcycle+wheel+chock

These are a little pricey but but sure work well with the fat tires. The first picture is the only close up I have but they are sweet.

IMG_8635.jpeg
IMG_8511.jpeg
 

drew562

Active VIP Member
Joined
Mar 13, 2008
Messages
5,459
Reaction score
21,378
Location
edmonton
These may be a little bit overkill but they throw in with the deck. They are made by Condor Canada https://www.amazon.ca/condor-motorcycle-wheel-chock/s?k=condor+motorcycle+wheel+chock

These are a little pricey but but sure work well with the fat tires. The first picture is the only close up I have but they are sweet.

View attachment 283058
View attachment 283059
Can’t tell from the pics if your back tires have a strap through them. I now run Rear wheel straps through the rim, holding it down to the deck. Last year with my Ebike on the deck the truck bounced hard on the highway making the back tire come off the ground. That loosened the strap and one side came undone.. It fell off driver side of the truck and destroyed the box side and both doors of my 2022 black super duty. It was still hanging from one strap and swinging down my truck.
I still get choked up when I talk about it lol
 

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
112,062
Reaction score
86,088
Location
beautiful, downtown Salmon Arm, BC
Can’t tell from the pics if your back tires have a strap through them. I now run Rear wheel straps through the rim, holding it down to the deck. Last year with my Ebike on the deck the truck bounced hard on the highway making the back tire come off the ground. That loosened the strap and one side came undone.. It fell off driver side of the truck and destroyed the box side and both doors of my 2022 black super duty. It was still hanging from one strap and swinging down my truck.
I still get choked up when I talk about it lol
That’s a bummer. I drive on BC roads and maybe they are smoother, hahaha
I haven’t had a problem but they do move. I drive quite slow up the logging roads and keep my eye on things back there.
To be pro-active, it would be worthwhile to look into some kind of tie down.
 

drew562

Active VIP Member
Joined
Mar 13, 2008
Messages
5,459
Reaction score
21,378
Location
edmonton
That’s a bummer. I drive on BC roads and maybe they are smoother, hahaha
I haven’t had a problem but they do move. I drive quite slow up the logging roads and keep my eye on things back there.
To be pro-active, it would be worthwhile to look into some kind of tie down.
I was in BC. Going down that logging access road to Little Hells gate. Truck front tire dropped in a small hole on one side, causing the truck to rock and bounce.. I couldn’t see the hole while facing downhill. Bikes stood on end one strap came off. Now I just gently put a tie down through both back tires between the spokes to stop it from doing an Endo. My bikes lasted a few years up there with no problems just snug down the front. Of course the day I’m in my brand new king it happened.
 
  • Like
Reactions: GRD

Lem Lamb

Active VIP Member
Joined
Apr 5, 2010
Messages
4,282
Reaction score
7,802
Location
Lacombe AB
I cant see why a person can fab up some kind of wheel locks that would work for a sled deck or truck box...

Strap the handle down too prevent the bike (s) from flopping around

You can find lots of different hidden or flush mount tie-down mounts too add to yours deck if you want...

Princes Auto has an assortment of different anchor point mounts too choose from...

Don
 

Cableguy

Active VIP Member
Joined
Dec 16, 2014
Messages
2,112
Reaction score
5,030
Location
Okanagan
back yard bolt ons has a design that the super clamps hold down the bike rack
and the bikes front tire sits in will get dusty to send me a pic or check his website
 
  • Like
Reactions: GRD

Lem Lamb

Active VIP Member
Joined
Apr 5, 2010
Messages
4,282
Reaction score
7,802
Location
Lacombe AB
My friend built a 2 place mtb rack for his truck box that requires 2 lock points per bike...

The back wheel is secured with a spring pin with protective sleve with wheel sitting in the C-channel...

Front tire rests in the channel ,,, he built a pivoting up and down bar with a U-hook that slides down over the top of the handle bars/ and lock that holds the bike securely over the ruffest wash board logging roads...

No straps and its effortless too clamp in the bikes,,, less then a minute too load and go...

Click click and done...
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,595
Reaction score
18,803
Location
Edson,Alberta
Crosstrax built one for me this year. I did some modifications to it as it was the first one they built with measurements taken over the phone. Works on the sled deck with a super clamp, works in the back of my truck, and works at the campsite to hold all the bikes.
 

Attachments

  • IMG_8699.jpeg
    IMG_8699.jpeg
    634.3 KB · Views: 69

gdhillon

Active VIP Member
Joined
Sep 27, 2013
Messages
1,554
Reaction score
1,116
Location
Prince George
In the past I have just removed the seat and stood the bike upside down with a strap or two through the frame
 
Top Bottom