Bar Riser

[burny77]

Does anyone know what the part number or where to get a 2" riser for a 2011 Pro RMK. Wow is the dealership here dumb!!

 

[sledhead80]

PowerMadd makes a 2 inch bar riser that works for the pro, pretty cheap too. I think around 40 bux.

 

[OnlyPolaris]

Polaris only makes a 1" for the pro. Have to go with something like a powermadd.

 

[wipe out]

If you put a power MADD bar riser in would you need cable extensions

 

[ajb1205]

My bro-in-law installed the powermadd 2" riser on his without the need to extend any cables but you will need bolts that are about 3/4" longer. I will be installing the same 2" riser on my 2010 Assault once I pick up the longer bolts. Yah...my local dealership was no help what-so-ever either.

 

[polarisassault800]

must be in saskatoon and it must be guriton lol i put a 2 inch on mine and no added cables i picked mine up at rec supply in saskatoon

 

[ajb1205]

Stock hex bolts are 1/4" - 20 x 2-1/2"...so the same bolt 4-1/2" long is what you will need (and what I just ordered...in a grade 5 bolt). I will confirm once I get it installed. Not from Saskatoon...live in the "Border City".

 

[adamg]

Hmm... where to get these long screws with a socket head cap.

 

[sleded1]

I went to 3.5" so I have a 2" with bolts if anyone needs one.....