Banshees...what you got...whats in it.

87' Banshee

New member
Joined
Apr 13, 2009
Messages
2
Reaction score
0
Location
Red Deer AB
Tell me everything about you banshee.ex

'87 banshee



FMF SST pipes
pro design cool head
boyseen reed
new wiseco top end, 4-5 hrs
30mm D side carbs with twist, 1hr (also have stock with thumb throttle)
completely rewired
works shocks set for 170-210lb rider
custome paint
kill switch
all covers billet
chrome pegs, bumbers, a-arm, swing arm
steal braided lines
 

adrian450

Active member
Joined
Apr 12, 2009
Messages
33
Reaction score
0
Location
edmonton
i have a 2002 banshee

ported/polished
piped/jetted
shaved head
k&n air filter
T.O.R.S kit

nothing fancey to look at but i would match it against anything

also have a 07 yfz 450 se with lots of extras
 

SAVAGE420

Active member
Joined
Jan 24, 2007
Messages
134
Reaction score
8
Location
Revy-Sicky. BC
Website
www.bansheehq.com
F.A.S.T Racing (Farm and sand toys racing) Aggressive Dune Port, Toomey T5 Pipes. Noss Head-19cc custom cut Domes, Wiesco's, VF3, 30mm Flat Slide Carbs, 3/8 Spacers, Pro Design Intakes, Lightened Flywheel, +5 Timing, Dirt digger clutch, Gear Saver, K/N Pods, 100LL & Amsoil Interceptor, Sidewinder Gold X-ring Chain, 15/40 Sidewinder Sprockets, AMP Link, +4 G-Force Axle, +3+1 arms, Yfz Shocks, Noss +2 Billet Tie-Rods, Cascade Mod Shift Star, Tudors Shift Kit, F.A.S.T Mod shift shaft and easy spring, Mod Quad Billet Impeller, Billet Inline Cooler, Engine Ice, ASV Shorty F3 Levers, Pro Tapers, CRJ Digital Temp Gauge, 200W Stator, 55W Trail Techs, 60 LED tail light, Razer 2's for dirt & Hauler 8 paddle for sand, Polished ITP Baja offset wheels, Black Laker Plastic, Verde Power sports scull/lightning gripper seat cover, Custom Made Savage420 Flaming Grill, Mod-Quad Billet Case Saver, Ac Pro Peg Nerfs, Blingstar Iron Cross Bumper, Pro Armour Skids All Around, Frame Armour, Billet stator cover, Polished clutch cover and inserts, Billet Gas Cap, Pipe Hangers And a Bunch More ch!t Polished, Chromed, Powder coated or Billet and little things that there's no point in saying.
:cool:

Anyways here is some pics from last spring/summer.

[media]http://i27.photobucket.com/albums/c164/savage_420/Firstripoftheseason001.jpg[/media]

[media]http://i27.photobucket.com/albums/c164/savage_420/Firstripoftheseason002-1.jpg[/media]

[media]http://i27.photobucket.com/albums/c164/savage_420/Some%20more%20Dunning%20pics%20with%20the%20SLR%20Cam/Sandfest2008040.jpg[/media]

[media]http://i27.photobucket.com/albums/c164/savage_420/Some%20more%20Dunning%20pics%20with%20the%20SLR%20Cam/Sandfest2008087.jpg[/media]

[media]http://i27.photobucket.com/albums/c164/savage_420/SandFest%202008/SandFest2008andarea018.jpg[/media]

SandFest2008andarea031.jpg


[media]http://i27.photobucket.com/albums/c164/savage_420/SandFest%202008/SandFest2008andarea127.jpg[/media]

[media]http://i27.photobucket.com/albums/c164/savage_420/SandFest%202008/SandFest2008andarea135.jpg[/media]

[media]http://i27.photobucket.com/albums/c164/savage_420/NewSavage420LakerGrill001.jpg[/media]

[media]http://i27.photobucket.com/albums/c164/savage_420/NewSavage420LakerGrill003.jpg[/media]

[media]http://i27.photobucket.com/albums/c164/savage_420/RippinApril27-08007.jpg[/media]

[media]http://i27.photobucket.com/albums/c164/savage_420/My%20house%20shop%20and%20land%20and%20stuff/PretrippicstoSandfest004.jpg[/media]

[media]http://i27.photobucket.com/albums/c164/savage_420/My%20house%20shop%20and%20land%20and%20stuff/PretrippicstoSandfest005.jpg[/media]

Enough?:eek:


I will get up new pics soon, as ive done a few different things and changed it up a bit over winter from the pics above.

Chris.:beer:

WWW.BANSHEEHQ.COM
 

adrian450

Active member
Joined
Apr 12, 2009
Messages
33
Reaction score
0
Location
edmonton
thats a sick banshee man...what would you say the top speed is. i could only emagine how much money is into that quad.
 

SAVAGE420

Active member
Joined
Jan 24, 2007
Messages
134
Reaction score
8
Location
Revy-Sicky. BC
Website
www.bansheehq.com
thats a sick banshee man...what would you say the top speed is. i could only emagine how much money is into that quad.

Thanx for the kind words man.

I dont know what the top speed is as i don't have a speedo. All i know is, it moves out really effin good.
Top speed i would say is...(never fast enough for me KPH LOL)

Ive been throwing money and modifying my banshee for quite a few years now.
IMO it will never be done, as there is just some much ch!t to do to them and im 100% addicted to it.

I Ride it all summer and tear down all winter, it's just about ready for this riding season, few more parts and im good to go.

Later
Chris.
 

Mc Squished

Member
Joined
Mar 9, 2009
Messages
7
Reaction score
0
Location
Slave Lake
All i know is if it aint got a Cheetha it aint got ch!t!!!! bring on the sand!!! ans adrian450 if yr foot peg would stay on yr shee it might work a little better!! hahhahah & if you guys know whats good 4 ya you would stay away from brule!! yr gunna get beat!!! and then you'll have to lie to yr friends!!!
 

adrian450

Active member
Joined
Apr 12, 2009
Messages
33
Reaction score
0
Location
edmonton
im not going to bruel....and the foot peg thing well that just slows it down having thoes on there they weigh to much lol
 

SAVAGE420

Active member
Joined
Jan 24, 2007
Messages
134
Reaction score
8
Location
Revy-Sicky. BC
Website
www.bansheehq.com
All i know is if it aint got a Cheetha it aint got ch!t!!!! & if you guys know whats good 4 ya you would stay away from brule!! yr gunna get beat!!! and then you'll have to lie to yr friends!!!

Cheetah and cheetah cub = Drag/hill drag racing set up IMO.

Also a DM or DMX makes a cheetah or cheetah cub look like a 300ex on the strip, been there done that.:cool:

I race Gncc/mx so my setup wins races.:Cool9:

Also get PICS OF GTFO:beer:
 

Captjacksparrow

Active VIP Member
Joined
Nov 8, 2007
Messages
671
Reaction score
951
Location
Sylvan Lake
I had a Banshee, had alot done, unbelievable fast.

Here's alist of some of what was done:
-4mm stroker crank & 5mm long rods, with a small bore, 408cc
-full race port job
-cool head, 18cc domes, 107 octane only.
-billit carb adaptors with Boyesen Rad Valves.
-35mm Keihen carbs
-adjustable billit timing cover
-big volumn CPI race pipes, chromed
-full race clutch
-4" swing arm
There was lots more done to it but that's main stuff. It would pull Choke Cherry hill at St Anthonys dunes in 4th gear with a 15 tooth front sprocket, and 22" tires, and that was with my 270lbs on it. It was scary fast but got stolen last year.
My buddy that weighs 175lbs raced a Banshee on choke that had a 420 Cheetah motor with billit cyls and mine (still stock cyl's but ported) beat it by a couple to 3 lengths on Choke. The guy was some surprised, he said it was the fastest stock cylindered Banshee he'd ever seen.
 

Attachments

  • 100_0738 (Medium).jpg
    100_0738 (Medium).jpg
    94.6 KB · Views: 92

SAVAGE420

Active member
Joined
Jan 24, 2007
Messages
134
Reaction score
8
Location
Revy-Sicky. BC
Website
www.bansheehq.com
Looks/ sounds good Captian.

I would murder someone if they stole any of my toys.

Any leads into where yours went?

I know itwas last year, but i will still keep my eye out for someone parting or selling it.

Later.
 

cobbycat

Active member
Joined
Jun 14, 2008
Messages
119
Reaction score
0
Location
fort st john, bc
I have a 2001 with a few toys;
vito's 404 big-bore
cool head
pro circuit pipes
aluminum race rad
2 into 1 intake and race carb
v-force reed cage
pro-taper bars
lone star chrome steering stem
lone star axle +4
lone star swing arm -1
lone star a-arms +4
ohlins tripple rate shocks all around
dg bumper and grab bar
dessert 5 gal tank
nerf bars
k&n air filter
full hinson clutch and basket
billet kicker, clutch lever, brake resevoir cover, shifter, e-brake block off,and gas cap
razor tires
sand paddles
NOS

it goes all right, would like to see how it stacks up!
 

SAVAGE420

Active member
Joined
Jan 24, 2007
Messages
134
Reaction score
8
Location
Revy-Sicky. BC
Website
www.bansheehq.com
I have a 2001 with a few toys;
vito's 404 big-bore
cool head
pro circuit pipes
aluminum race rad
2 into 1 intake and race carb
v-force reed cage
pro-taper bars
lone star chrome steering stem
lone star axle +4
lone star swing arm -1
lone star a-arms +4
ohlins tripple rate shocks all around
dg bumper and grab bar
dessert 5 gal tank
nerf bars
k&n air filter
full hinson clutch and basket
billet kicker, clutch lever, brake resevoir cover, shifter, e-brake block off,and gas cap
razor tires
sand paddles
NOS

it goes all right, would like to see how it stacks up!

We should hit up silver creek Mt IDA area this summer man. Im only 20 minutes away.

I know a couple other guys with shees that live in salmon arm too.
 

cobbycat

Active member
Joined
Jun 14, 2008
Messages
119
Reaction score
0
Location
fort st john, bc
We should hit up silver creek Mt IDA area this summer man. Im only 20 minutes away.

I know a couple other guys with shees that live in salmon arm too.

I'm game! been out to the silver creek pit a couple weeks ago and there is still snow in the shaddows. was up kelly main last weekend and it was alright, but still snow at the power lines about 5 km up. do you know Al and Ritchie? have a few other buds that ride too. drop me a PM when ever you want to play.

cobbycat:beer:
 

SAVAGE420

Active member
Joined
Jan 24, 2007
Messages
134
Reaction score
8
Location
Revy-Sicky. BC
Website
www.bansheehq.com
I'm game! been out to the silver creek pit a couple weeks ago and there is still snow in the shaddows. was up kelly main last weekend and it was alright, but still snow at the power lines about 5 km up. do you know Al and Ritchie? have a few other buds that ride too. drop me a PM when ever you want to play.

cobbycat:beer:

Al and rich are who im talking about!

I don't know if you know my good buddy Ron Durocher, he used to ride a zilla 500 but now rides a KTM 525, anyways we usually head over to al's place up in the industrial park in the summer and usually ride from his place or the silver creek sand pits.

AL's nephew lives out this way too and rides a shee. Ive never rode with him yet as he don't get out much on it any more he's said.

Also rode with another guy from salmon arm up larch few summers ago, was pretty mellow up there, but fun!

Im still waiting on a few parts for my shee so im not riding till i get the parts in.

I will hit you up when im ready to roll.

I have some good riding out here too, just to much snow still yet.
 

cobbycat

Active member
Joined
Jun 14, 2008
Messages
119
Reaction score
0
Location
fort st john, bc
Al and rich are who im talking about!

I don't know if you know my good buddy Ron Durocher, he used to ride a zilla 500 but now rides a KTM 525, anyways we usually head over to al's place up in the industrial park in the summer and usually ride from his place or the silver creek sand pits.

AL's nephew lives out this way too and rides a shee. Ive never rode with him yet as he don't get out much on it any more he's said.

Im still waiting on a few parts for my shee so im not riding till i get the parts in.

I will hit you up when im ready to roll.

I used to live with Ron, small world eh? rode plenty with all of them. I got out of quadding a few years ago but I just bought Mike's banshee last fall and am itching to get out. I'm sure we know each other! I'm darren.:beer:
 

grizzley1

Active VIP Member
Joined
Sep 6, 2008
Messages
247
Reaction score
0
Location
ponoka
wow all nice banshees there guys ,sure makes me jelous to see them.
 

intmid8or!

Problem Child
Joined
Feb 26, 2007
Messages
7,120
Reaction score
1,137
Location
Spruce Grove
have fullbore plastics on hand for the banshees... red, yellow, white, silver, orange on hand. lots of cascade billet as well....
 

SAVAGE420

Active member
Joined
Jan 24, 2007
Messages
134
Reaction score
8
Location
Revy-Sicky. BC
Website
www.bansheehq.com
I used to live with Ron, small world eh? rode plenty with all of them. I got out of quadding a few years ago but I just bought Mike's banshee last fall and am itching to get out. I'm sure we know each other! I'm darren.:beer:

Yo darren, you ride at silver creek yet?

Hit me up man.

Chris
 

Ridin High

Active VIP Member
Joined
Oct 4, 2008
Messages
305
Reaction score
49
Location
Edmonton
I have a 2007 with Toomey TR-6 pipes and thats it. Barely used and im trying to unload it.
 
Top Bottom