Ball joint or hub bearing?

OVERKILL 19

Active VIP Member
Joined
Dec 22, 2006
Messages
3,420
Reaction score
1,933
Location
Red Deer
On my 09 3500 dodge I have a pulse in the steering after making corner and return to center. Jacked her up slight play top to bottom. Buddy told me its wheel hub! But I would think this is ball joint. Anyone have this happen. Thx in advance!
 

Carrots

Active VIP Member
Joined
Nov 23, 2009
Messages
4,265
Reaction score
2,079
Location
spruce grove, alberta
On my 09 3500 dodge I have a pulse in the steering after making corner and return to center. Jacked her up slight play top to bottom. Buddy told me its wheel hub! But I would think this is ball joint. Anyone have this happen. Thx in advance!

That's a ball joint. My old truck had that happen


Sent from a iPhone
 

Pistonbroke

Active VIP Member
Joined
Oct 10, 2007
Messages
3,366
Reaction score
11,203
Location
Cockring, AB
How does ujoint cause top bottom play?

Of course it can't, and if you have top/bottom play you have already nailed the answer of a ball joint. I think if it gets bad though it will take out the U-joint if I am looking at it right?

I have Carli ball joints on order (thank you HRT!) and will put in new U-joints at the same time.
 

medler

I love guns
Joined
Aug 6, 2007
Messages
17,667
Reaction score
8,146
Location
Stettler Alberta
Typicial dodge thing..No grease fittings so the ball joints are toast at 60,000 km..Nothing against dodge,but like come one ,have them so there greaseable
 
Last edited:

arcticdodge

Active VIP Member
Joined
Nov 15, 2006
Messages
616
Reaction score
232
Location
Redcliff Alberta
Greats able are great unless you do not like to grease then they will be worn out way quicker than non greasable
 

Summitric

SUPER COOL MOD & Supporting Vendor
Moderator
Joined
Oct 21, 2006
Messages
48,075
Reaction score
32,180
Location
Edmonton/Sherwood Park
Website
www.bumpertobumper.ca
Sounds like a front axle universal joint....... Jack up each front wheel and leave the transmission and transfer case in neutral and turn the steering wheel all the way to one side and try turning each front wheel..... You will know if a u-joint has seized up. Very common.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,558
Reaction score
16,993
Location
DA Moose B.C
Typicial dodge thing..No grease fittings so the ball joints are toast at 60,000 km..Nothing against dodge,but like come one ,have them so there greaseable

It's such a puss pour setup.

No greaseable u joint on a live shaft.

Stupid is as stupid does

sent from my htc
 

OVERKILL 19

Active VIP Member
Joined
Dec 22, 2006
Messages
3,420
Reaction score
1,933
Location
Red Deer
Sounds like a front axle universal joint....... Jack up each front wheel and leave the transmission and transfer case in neutral and turn the steering wheel all the way to one side and try turning each front wheel..... You will know if a u-joint has seized up. Very common.
But how does that cause top bottom play?
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,558
Reaction score
16,993
Location
DA Moose B.C
Either way. If Ur doing ball joints and it don't have greaseable wheel joints do them...................

I won't install ball joints with out doing axle joints if there stock.

Adds like 1/2 hour extra labor.

Do it right the first time

sent from my htc
 

Summitric

SUPER COOL MOD & Supporting Vendor
Moderator
Joined
Oct 21, 2006
Messages
48,075
Reaction score
32,180
Location
Edmonton/Sherwood Park
Website
www.bumpertobumper.ca
Or are you saying in addition to the ball joint?

THE WOBBLE WILL BE CAUSED BY THE BALL JOINT ;)........ THE BALL JOINTS ARE JUST WORN OUT

Lower Ball Joint:
If total lower ball joint movement reading is above 2.29 mm (0.090 in) then replacement of the lower ball joint is necessary

Upper Ball Joint:
If total upper ball joint movement reading is above 1.52 mm (0.060 in) then replacement of the upper ball joint is necessary
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,558
Reaction score
16,993
Location
DA Moose B.C
And that's the up and down spec.

If it has any side to side its done like dinner.



sent from my htc
 

OVERKILL 19

Active VIP Member
Joined
Dec 22, 2006
Messages
3,420
Reaction score
1,933
Location
Red Deer
Bought upper, lower and a u joint. Parts buddy scored me a good deal at $ 200 for it all
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,558
Reaction score
16,993
Location
DA Moose B.C
Oh and don't cheap out on ball joints.

The cheap ones I have seen and installed were loose right from the box.

Just by the OEM replacements with the grease nipple on the lower ball joint at the top edge. Some u can't leave the 45 nipple in cause it hits the axle joint cause its in the center.

Best is moog or Spicer ( but Spicer are not quite as good )

sent from my htc
 
Top Bottom