Avid D&R installation instructions

[XP2009]

Would anyone have a step - step procedure to install a Avid D&R on a pro? it apparently does not come with one.

I have searched and found many posts hi-lighting some of the install but not all. Any help would be great. Thanks.

 

[glassman]

Contact robbie at avid. He will send you the instructions via e-mail. That is how I got mine.

 

[XP2009]

I talked to Robbie today and he said there are no instructions. He said to call him when its all apart and he will walk me through.

Glass. Would you still have yours to forward ?

 

[glassman]

removal of chaincase involves heating the adhesive with a propane torch.

You have to cut the little notch off the tunnel

Fit the billet housing on the clutch side and mark the bearing retainer on the inside of the tunnel. Cut away the marked out area.

Notch the footwell for the lower bolt on the chaincase.

Bolt everything up and drill two extra holes. The chaincase uses the existing two front bolt holes and you drill the three back ones.

Install and check fitment of drivers.

Drill the front suspension bolt down and back 1" and use the provided blocks with pilot holes on the back brackets.

The rails need to be cut back 2 3/4" to avoid hitting the drivers.

The kit came with 19/45 gearing and the stock clutching seems to be pretty close.
Attached Thumbnails

 

[XP2009]

Thanks very much.