asked this once before

[sweld]

i asked this once before but had no replies so i thought i woould try again, can u put a snopro gauge on a regular m series without changing the harness. thanks

 

[polarice]

i asked this once before but had no replies so i thought i woould try again, can u put a snopro gauge on a regular m series without changing the harness. thanks

one reply

 

[sweld]

thanks for your help

 

[belch22]

I asked that at Don's Speed Parts two weeks ago and they checked into it and said that you can plug it into the stock harness.....on the '08's anyway....not sure how badly you want to upgrade to that gauge as it runs somewhere around $530 if I remember correctly

 

[femme.fatale.]

i asked this once before but had no replies so i thought i woould try again, can u put a snopro gauge on a regular m series without changing the harness. thanks

The wiring harness is the same part number, SO the ends will be the same.

DLX gauge is 533.95
REG gauge is 387.25

Not a huge difference if your already replacing!

 

[steven2120]

hey sweld...is that your rig with the m1000 and m8 on a jacked up ford?

 

[sweld]

yup it was were out of grande cache now and in edson for a month

 

[Rucky]

The wiring harness is the same part number, SO the ends will be the same.

DLX gauge is 533.95
REG gauge is 387.25

Not a huge difference if your already replacing!

If you replace your gauge cluster, do your km's and hours clear, or is it on the machines computer?

 

[2manykids]

If you replace your gauge cluster, do your km's and hours clear, or is it on the machines computer?

Was going to take buddies out and toss into mine to put this one to bed... guess it is still wide awake now thanks

 

[Rucky]

Was going to take buddies out and toss into mine to put this one to bed... guess it is still wide awake now thanks

I had the same idea. Thought this might be a little easier

 

[femme.fatale.]

If you replace your gauge cluster, do your km's and hours clear, or is it on the machines computer?

Yep i believe it goes back to zero.