anyone want to ride?

RXN

Active VIP Member
Joined
Feb 26, 2009
Messages
7,063
Reaction score
37,363
Location
Gibbons, Alberta, Canada
Just spoke with Carmen (she's putting this ride on). We are in a different area. She is aware of the area you had mentioned, which is good

If anyone wants to tag along. I'm meeting a few others at Wheelers (Esso station on Highway 2, by Legal).
Leaving Wheelers around 830am.
 

RXN

Active VIP Member
Joined
Feb 26, 2009
Messages
7,063
Reaction score
37,363
Location
Gibbons, Alberta, Canada
A few from today's gong show. (That doesn't quite sum it up to what it was either).
The folks in the Rzr did a polar plunge.
Had a fire to dry them up. And gave them some extra clothing and boots. And whatever we had.

Then made the bad decision to drop down a fair sized hill, with lots of snow.
That lead into a short little valley and lots of snow and steep little climb out.

The quads made the climb. The rzr was too low. Kept high centering.
Decided to turn around.

Part way up the hill we dropped in on, the defender blew its belt. Winched it the rest of the way.

Then between there and the road we towed it to, snapped two winch lines. A couple tow straps and my paracord tow strap (from tied up paracords).
In that time frame the front passenger axle broke on the defender (as it was being towed), and the tie rod bolt snapped. He'll need a new tire and rim.

Got back to the trucks with gas lights on. Then
Had to drive over to where we left the defender and load it up.

Was an adventure today.

20220416_115540.jpg
20220416_122123.jpg
received_534408388246585.jpeg
received_1199305214144164.jpeg
received_771433147595353.jpeg
received_335936511938663.jpeg
received_761456601895862.jpeg
Screenshot_20220416-211103_Gaia GPS.jpg
Screenshot_20220416-211151_Messenger.jpg
Screenshot_20220416-211206_Messenger.jpg
 

RXN

Active VIP Member
Joined
Feb 26, 2009
Messages
7,063
Reaction score
37,363
Location
Gibbons, Alberta, Canada
Heading to Chump Lake area on May Long.
Small group of us, camping and riding.
Open invitation if any fellow snow and mudders wish to join.
 

RXN

Active VIP Member
Joined
Feb 26, 2009
Messages
7,063
Reaction score
37,363
Location
Gibbons, Alberta, Canada
May 7th. Hitting up Nordegg if anyone is interested in joining
Meeting at the Canadian Tire parking lot in Rocky Mountain House at 9am.
 
Last edited:

RXN

Active VIP Member
Joined
Feb 26, 2009
Messages
7,063
Reaction score
37,363
Location
Gibbons, Alberta, Canada
20220507_112201.jpg

Was a long drive to sit in the truck. Lol.

So last weekend, I installed new demon axles. Went pretty good I thought.
Moved the machine back and forth in my quonset a few times. The noise was gone. Felt pretty good.

Loaded up last night. Drove down to Nordegg this morning.
Off loaded. Drove around the truck. And as I was passing the front of my truck. Something felt odd. I wrote it off as the ruts I was on.
Through the ditch around the gate and onto the trail. There is a small incline. Again Something was wrong. But I chose to ignore it.
As we were headed down the trial every time I let off the machine would get squirrely on me. Still I chose to keep on.
At the 8km mark there was a wee little mud hill. I couldn't climb it. It was embarrassing.
Finally decided this "something wrong" needed to be looked at.
Broke an axle.

So limped it around a bit. Then decided I'd hang at the truck. Let everyone else ride around.
I went for a nice little walk. Enjoyed that.

Then I get home and looked at the boxes the new axles came in
And noticed it clearly states. LEFT REAR on one box and Right Rear on the other.
I find the part numbers on the axles and yeah. I put them them on the wrong side, cause I Assumed both were the same.

We know all what Assumptions mean.
Crap.
My own stupidity on this one.

So in the market for another set of Axles
This time I will make damn sure I put them on the right sides.

So today was a bust. Hope to be riding on the long weekend

20220507_145010.jpg
20220507_145013.jpg
20220507_145834.jpg
20220507_145154.jpg
 

smokinD

Active VIP Member
Joined
Jun 1, 2011
Messages
4,323
Reaction score
19,413
Location
Freedom, Ab
View attachment 256172
Was a long drive to sit in the truck. Lol.

So last weekend, I installed new demon axles. Went pretty good I thought.
Moved the machine back and forth in my quonset a few times. The noise was gone. Felt pretty good.

Loaded up last night. Drove down to Nordegg this morning.
Off loaded. Drove around the truck. And as I was passing the front of my truck. Something felt odd. I wrote it off as the ruts I was on.
Through the ditch around the gate and onto the trail. There is a small incline. Again Something was wrong. But I chose to ignore it.
As we were headed down the trial every time I let off the machine would get squirrely on me. Still I chose to keep on.
At the 8km mark there was a wee little mud hill. I couldn't climb it. It was embarrassing.
Finally decided this "something wrong" needed to be looked at.
Broke an axle.

So limped it around a bit. Then decided I'd hang at the truck. Let everyone else ride around.
I went for a nice little walk. Enjoyed that.

Then I get home and looked at the boxes the new axles came in
And noticed it clearly states. LEFT REAR on one box and Right Rear on the other.
I find the part numbers on the axles and yeah. I put them them on the wrong side, cause I Assumed both were the same.

We know all what Assumptions mean.
Crap.
My own stupidity on this one.

So in the market for another set of Axles
This time I will make damn sure I put them on the right sides.

So today was a bust. Hope to be riding on the long weekend

View attachment 256174View attachment 256175View attachment 256176View attachment 256177
Dam, oh well i am sure most of us have done this at some point while repairing stuff, i know i have. Human nature to learn by mistakes not by our success's. Looks dry out there in Nord country will be heading out there sometime in the near future to do some touring.
 
  • Like
Reactions: RXN

RXN

Active VIP Member
Joined
Feb 26, 2009
Messages
7,063
Reaction score
37,363
Location
Gibbons, Alberta, Canada
Dam, oh well i am sure most of us have done this at some point while repairing stuff, i know i have. Human nature to learn by mistakes not by our success's. Looks dry out there in Nord country will be heading out there sometime in the near future to do some touring.
It was fairly dry. Looking forward to heading back down there again.
 

RXN

Active VIP Member
Joined
Feb 26, 2009
Messages
7,063
Reaction score
37,363
Location
Gibbons, Alberta, Canada
Well thats too bad, live and learn. Your crew like the area ?
Sure did.
Will have to plan a camping trip down there. And a few days of riding.

It was good too as now there know it really isn't that far for a day trip. Lol
 

RXN

Active VIP Member
Joined
Feb 26, 2009
Messages
7,063
Reaction score
37,363
Location
Gibbons, Alberta, Canada
Sounds like Vega on Saturday if anyone wants to join, shoot me a message
Meeting at the Tim's in Westlock around 830 am

Chump lake for the long weekend
 
Last edited:

RXN

Active VIP Member
Joined
Feb 26, 2009
Messages
7,063
Reaction score
37,363
Location
Gibbons, Alberta, Canada
Nordegg - Take 2.
May 28th. 2022.

well, last attempt I didn't make it very far. popped an axle.
machines all fixed up. so thinking of trying again.
planning to Meet at the Canadian Tire parking lot in Rocky Mountain House for 9 - 930am on May 28th.
leave there at 930. should be staged around 1030.
plan is to loop the one Mountain range pop up in Nordegg. then if time allows may hit a few other trails if not. rail trail back to the trucks.

this unfortunately is my last ride until August. (work).

please let me know if you are interested.

thanks.

Purposed route:
Screenshot_20220501-180124_Maps.jpg



What to look for

20220408_144205.jpg
 

niner

Active VIP Member
Joined
Mar 14, 2009
Messages
8,606
Reaction score
61,914
Location
lacombe
I would like to join in, haven’t done that loop.
 
Top Bottom